300ml × 1 cup - Optimal for the motion mixing and degassing of materials in fields where high precision is required

A new entry model (SK-300SII) with enhanced functions!
"Medium mode" for minimizing mixing heat
"Wave mode" of enhancing mixing and dispersing force

Planetary Centrifugal Mixer

Model:

SK-300SII

Maker:

SHASHIN KAGAKU CO., LTD.

Download Materials

Brochure

Individual revolution and rotation speed control system

Equipped with revolution and rotation individual speed control system.
The ratio of revolution and rotation can be adjusted; thus 90 different speed combinations can be set.

All-in-one support of other applications (abrasive, coating, etc.).
With ordinary models, the rotation speed ratio is fixed by the gear ratio, so even if the speed of revolution is adjusted, some materials may not properly mix or create lump, and practically these problems could not be solved.
By contrast, with the individual speed control system, revolution can be set in 9 steps, rotation in 10 steps, providing the advantages below.

6 advantages of variable rotation speed

Furthermore, this keeps the temperature of the material down!

Rather than simple adjusting the speed of revolution, the speeds of revolution and rotation are optimized, thereby sustaining the thermal elevation of the material.

Revolving speed setting table

To keep rotation direction is as usual, new function which revolving direction is changeable either clockwise or anti-clockwise for revolution. Under vacuum pressure, it may change material property, however it enables to achieve high precision degassing even atmospheric pressure condition.

To keep centrifugal force of revolution, it enables to achieve setting which revolving speed pf rotation can be surpassed to revolving speed of revolution. Mixing force is drastically enhanced, thus it can correspond to various materials case.

Revolving speed comparison graph

Features

Advanced model equipped with the individual revolution and rotation speed control system
Carry out mixing of various materials of low to high viscosity in a short time( tens of seconds to several minutes)
Optimum settings enable user to achieve continuous operation. (5 steps)
Revolution and rotation can be set individually, so various types of materials can be handled.
There are no propellers, and it does not need to clean the machine. In addition, there is no loss of materials.

Mode setting according to the application

SK-300SII, the new medium mode has been added to the existing “mixing mode/degassing mode”.

Easy operation keeps same, it offers a wider range of applications and a selection of modes suited for the material.

Equipped with a balance navigation function

The balance can be adjusted easily for the unbalance detection and balance navigation functions.

Compatible with 300 ml containers/max. 310 g

Despite its compact size, this model can be used to process 300 ml containers weighing a maximum of 310 g (gross weight)!!

Designed with a full range of safety functions

This unit is designed with such considerations for safety as top lid lock, operation lock during while the lid is open and a malfunction prevention mechanism. In addition, the unbalance error detection and a full range of functions for warning and notifying of motor problems or maintenance set alarm with peace of mind.

Application

Wave Mode 【SK-300SⅡ】

Specification

Cup size		300ml×1cup, Maximum 310g (Gross Weight)
No. of revolutions	Mixer mode	200-2000rpm
	Medium Mode	200-2000rpm
	Degassing mode	400-2200rpm
No. of rotations	Mixing mode	follows at 40% of revolutions
	Medium Mode	follows at 20% of revolutions
	Degassing mode	follows at 3% of revolutions
Time of setting		Maximum 30 minutes (Total 9steps)
Step mode		Continues operation with 9 different action patterns(Condition setti ng) possible.
Memory channel		0-9channel
Power supply voltage		Single Phase AC200V-240V 50/60Hz
Power consumption		About 1,380W
External measurements		W340x D315xH370(mm)
Weight		Approx. 24kg