ONO SOKKI – TM 3100 series – Thiết bị đo tốc độ vòng quay

Dòng sản phẩm đo tốc độ vòng quay mới ra mắt, thích ứng đa dạng với các phép đo khác nhau, tích hợp chức năng để phù hợp với ứng dụng của bạn!!!

Các model trong dòng sản phẩm TM-3100 đều có các chức năng cơ bản về đo tốc độ vòng quay (thể hiện tốc độ, xuất dữ liệu BCD, tín hiệu tương tự, so sánh...) ngoài ra còn có thể tùy biến chức năng nhờ các thẻ.

Màn hình huỳnh quang làm cho thiết bị này hiển thị rõ ràng, ổn định, và dễ đọc kết quả hơn màn LED ở các model cũ.

Thiết bị đo tốc độ vòng quay

Model:

TM 3100 series

Maker:

ONO SOKKI

Download Materials

CATALOG

ĐẶC TRƯNG SẢN PHẨM

Tốc độ đáp ứng lên tới 100 kHz.
Khả năn g mở rộng chức năng bằng mô-đun.
Đèn huỳnh quang sáng rõ, giúp hiển thị rõ ràng, dễ đọc.
Dán nhãn CE, và cải thiện dung sai.
Hợp chuẩn DIN.

DÒNG SẢN PHẨM

Model	Name of optional card
	TM-0321 BCD output (Voltage Output)	TM-0322 BCD output (open collector)	TM-0330 Analog output	TM-0340 Comparator output	TM-0350 RS-232C	TM-0301 DC power operated
TM-3110	option	option	option	option	option	option
TM-3120	option	standard	option	option	Can not be built-in	option
TM-3130	option	option	standard	option	option	option
TM-3140	option	option	option	standard	option	option
＊TM-0321 or TM-0322 and TM-0350 cannot be assembled in the same system configuration at the same time.
＊TM-0321 and TM-0322 cannot be assembled in the same system configuration at the same time.

VIDEO

THÔNG SỐ KỸ THUẬT

Input section
Input terminal	M3 free terminal screw
Input impedance	10 kΩ or more
Input format	Voltage or non-voltage
Input amplification	AC or DC
Applicable detector	Electromagnetic/magneto-electric/photoelectric detector, rotary encoder, proximity switch
AC amplifier	Signal waveform: Sine or Square wave
	Signal voltage range: Sine 0.2 to 45 Vrms, square wave: 0.6 V to 63 V_p-p
	Signal frequency range: 1 Hz to 100 kHz
DC amplifier	Signal waveform: Square waveform having a pulse width at 5 μs or more.
	Signal voltage range: Hi level: +4 to +30 V, Lo level:-1 to +1 V
	Signal frequency range: 0.1 Hz to 100 kHz
Low pass filter	Selectable from OFF (100 kHz)/100 Hz/20 kHz
Pulse output section
Output voltage	Hi level +4.5 V or more
	Low level +0.5 V or less
Output logic	Negative
Load resistance	100 kΩ or more
Output terminal	M3 free terminal screw
Display
Display device	Fluorescent display tube (selectable of three-stage brightness, 6-digit display)
Display refresh time	Selectable from 0.2 s (factory setting), 0.4 s, 0.5 s, 0.6 s, 0.8 s, 1.0 s to 10 s (in 1.0s step).
Unit of measurement
	Calculation item	Unit
	Rotation speed	r/s, r/min, r/h
	Circumferential speed	mm/s, m/s, mm/min, m/min
	Moving speed	mm/s, m/s, mm/min, m/min, km/min, mm/h, m/h, km/h
	Period	s, min
	Times (1/s)	1/s, 1/min, 1/h
	Frequency	Hz, kHz
	Flow	ml/s, ml/min, ml/h, l/s, l/min, l/h
	Passing time	s, min
	User-defined	EU/s, EU/min, EU/h
	(Engineering unit)

Number of decimal points	Selectable from OFF (factory setting), number of decimal point of 1, 2 and 3 digit
SIG indicator	Blink in synchronization with input signal
Error display	Backup memory error, board error, input frequency error, display digit error, memory full error, setup value error
Calculation
Calculation display	Rotation speed, circumferential speed, moving speed, period, times(1/s), frequency, flow, passing time
Measurement method	Periodic calculation method
Calculation time	10 ms + 1 period time
Measurement accuracy	Display value × (±0.01 %) within ±1 count
	*The display value indicates the count value except the decimal point.
Auto zero function	The display value becomes zero with no signal input for the setup time in advance.
	Selectable from below;
	OFF (11 s), 0.5 s, 1.0 s, 2.0 s, 3.0 s, 4.0 s, 5.0 s, 6.0 s, 7.0 s, 8.0 s, 9.0 s, 10.0 s
Rapid deceleration follow-up function	If an input signal rapidly decreases and there is no signal input to tachometer approx. 1 second or more, measurement automatically decelerates with this function and then zeroed in approx. 11 seconds later.
Moving average function	Selectable from below:
	OFF (factory setting), 2, 4, 8, 16, 32, 64, 128
	*Analog output by TM-3130/0330 is obtained by the processing of
	moving average with the calculation at every 10 ms.
Peak-hold function	Hold the peak value (maximum, minimum, average) between start and stop status.
Memory
Panel condition memory	Memorize 4 kinds of measurement conditions.
	(The setup conditions can be stored and recalled.)
Power supply for detector
Output voltage	12 VDC ±10 %
Maximum output current	100 mA
General specifications
Power rating	100 to 240 VAC (50 Hz/60 Hz)
	*Cable for power supply is sold separately.
Withstand voltage	1500 VAC (1 min)
Insulation resistance	10 MΩ or more (at 500 VDC by megohhom )
Power rating	11 to 19 VA (TM-3110)
	13 to 21 VA (TM-3120)
	16 to 25 VA (TM-3130)
	12 to 21 VA (TM-3140)
	(Power rating is 20 to 30 VA when analog, BCD and
	comparator output cards are equipped.)
Operating temperature range	0 to +50 °C (with no condensation)
Storage temperature range	-10 to +60 °C (with no condensation)
Outer dimensions	96(W) × 48(H) × 148(D) mm
Weight	Approx. 310 g
Applicable standards
	CE marking	Low Voltage Directive EN61010-1: 2010 (3rd)
		Overvoltage Category II/Pollution Degree 2
	EMC(Electromagnetic Compatibility)Directive	Embedded board type EN61326: 2006

Accessories	Panel mounting fixtures x 1 set

Inquiry