NF DT SERIES Bộ lọc có thể lập trình | Nihon Denkei Viet Nam Co.,Ltd.

Bộ lọc có thể lập trình

Dòng NF DT là một bộ lọc lập trình có tính năng điều khiển tần số bằng các tín hiệu kỹ thuật số.

Bộ lọc có thể lập trình

Model:

DT Series

Maker:

DT Series

Model	Characteristics	Cut-off (center) frequency range	Freq. setting	Dimensions (mm)
DT-212	2-pole (1-pole pair) 12dB/oct (LPF, HPF) 6dB/oct (BPF)	D : 160kHz max. depends on externally connected resistors DC1 : 1Hz to 1.599kHz DC2 : 100Hz to 159.9kHz	BCD 3-digit	54.4 x 33.7 x 9.4 40 pins, DIP
DT-408	2-pole (1-pole pair) cascaded 12dB/oct x 2 (LPF, HPF) 6dB/oct x 2 (BPF)	D : depends on externally connected resistors DC2 : 1kHz to 159kHz	BCD 2-digit	54.4 x 33.7 x 8.0 40 pins, DIP
DT-208	2-pole (1-pole pair) 12dB/oct x 2 (LPF, HPF) 6dB/oct x 2 (BPF)	D : depends on externally connected resistors DC3 : 10kHz to 1.59MHz	BCD 2-digit	54.4 x 33.7 x 9.4 40 pins, DIP
DT-5FL	5-pole Elliptic LPF 60dB/oct equivalent	Type1 : 10Hz to 2kHz *	3-bit binary
DT-6FL	6-pole Elliptic LPF 80dB/oct equivalent	Type2 : 10Hz to 20kHz *	3-bit binary
DT-8FL	8-pole Elliptic LPF 130dB/oct equivalent	Type1 : 20Hz to 20kHz * Type2 : 100Hz to 100kHz *	4-bit binary	76.7 x 47.2 x 8.0 60 pins, DIP

Supply voltage :	±15V *1-2-5 sequence
* Can be installed in Multichannel DT Filter 3344.

OP-102 OSCILLATOR ADAPTER

OP-102 can be combined with DT-212D series to enable implementation of sinewave oscillator with the frequency set by a 3-digit BCD input.

Oscillation frequency range

1Hz to 100kHz
Eternally connected components are necessary in 100Hz or lower