This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
ITEMLIST
Products Infomation
- Products by Category
- Electronic measuring instruments
- Electrical safety testers / measuing instruments
- MICROTEST USB Type-C Cable Tester 8761NAC
Dedicated USB Type-C Cable Comprehensive Testing Solution (E-Marker IC/Voltage Drop/Protection Components/Electrical Testing)
For USB Type-C cable/connector testing, the dedicated option MICROTEST 8761NAC is available. It utilizes a four-wire measurement technology and supports automatic detection of USB Type-C loop orientation for connectors. It offers a maximum AC withstand voltage of 700V and a maximum DC withstand voltage of 1000V. It is equipped with the FX-000C28 2-in-1 current source expansion box, which provides the capability to perform continuity impedance, open/short circuit, safety withstand voltage insulation, RA resistance, and filtering capacitor tests on USB Type-C cables/connectors.
By selecting the FX-000C28 2-in-1 current source expansion box, it is possible to conduct 5A voltage drop internal resistance testing and VDO code reading for E-Marker IC on USB Type-C cables.
USB Type-C Cable Tester
Model:
8761NAC
Maker:
MICROTEST
4-Wire Test
Connect to DUT directly to prevent any deviation.
For measuring low resistance DUT, we recommend to choose 4-wire tester.
The measurement items of 8761/8761NAK cable or harness tester have (1) Open/Short;(2) Conductance; (3) Components; (4) AC Hipot; (5) DC insulation/ Hipot; (6) Quick conductance (7) Intermittence O/S, and (8) Quick Intermittence open circuit. It supports RS-232, USB Host, Print, Remote interfaces.
| Conductance | Detect the contact resistance in the cable connector. The conduction resistance is over the standard. |
| Open/Short Test | Make sure the contact of wire work properly.
Open: The wire should be contact, but it doesn’t Short: The wire shouldn’t be contacted, but it does |
| Intermittence O/S | Make sure the cable has intermittent open/short
defection |
Put a stabile high voltage on cable to make sure the quality of DUT
- _DC insulation
The result will judge by the rate of insulation resistance. Insulation resistance defect may cause DUT be penetrated or leakage current under high voltage.
- _Arc Test
Some high precision product for automobile and military can’t accept any arc under high voltage.
Inspect the loop contact in the connector fit the request of insulation and voltage.
Insulation resistance between loop is lower than the standard.
The voltage resistance is lower than the standard that cause leakage current.
Support for Component Measurement Functionality
_Resistance Test
_Capacitance Test
_Diode Test
Features
- 4-wire measurement conductance 1mΩ-52Ω
- Test pin 64/128
- E-Marker IC Test
- Voltage Drop Test (5A)
- Open/Short
- Conductance
- AC/DC Hipot Test
- DC insulation
- Support bar code scan and print function
- Automatically identify the normal or reverse plugin of wire or connectors
8761NAC USB Type-C Tester
Specifications
| Model | 8761NAC |
| AC Hi pot Test | 100V-700V |
| DC Hi pot Test | 50V-1000V |
| Test Pin | 64/128 |
| Model | 8761NAC |
| Safety Hi pot Test | |
| AC Hipot Leakage Current | 0.01mA -5mA |
| AC Arcing Detection | 0-9 |
| DC Hipot Leakage Current | 0.1µA-1000µA |
| DC Arcing Detection | 0-9 |
| DC Hipot Insulation Resistance | 1MΩ-1.2GΩ |
| Hipot Output Accuracy | ±5% |
| Hipot Measurement Accuracy | ±5% |
| Rated Output | 5Vdc |
| Hipot Measurement Time | 0.01秒 – 60秒 |
| Wire Specifications | Maximum allowable capacitance 5μF |
| Low Voltage Electrical Test | |
| Measuring Mode | 4-Wire Test |
| Conductance | 1mΩ-52Ω |
| Intermittence Conductance | 1mΩ-52Ω |
| O/S
Intermittence O/S Quick Intermittence open circuit |
1kΩ-100kΩ |
| O/S Determinal Judge | ● |
| Single-Side Test | ● |
| OS Positive and Negative Judgment Method | Learning netlist by four groups |
| OS Voltage | Adjustment range 0.1V-4V |
| OS Netlist Test Mode | Pattern/point-by-point scanning |
| Component test | |
| Resistance | Measurement Range
50mΩ-20MΩ |
| Level Signal
0.5-3V |
|
| Current Signal
10mA |
|
| Capacitance | Measurement Range
10pF-12µF |
| Level Signal
0.3V-1.2V |
|
| Frequency Signal
AUTO Gear (Optional) 48Hz/480Hz/4.8kHz/48kHz |
|
| Diode | Measurement Range
0-6.8V |
| Other Function | |
| Advanced Functions | Programmable continuous test / Pin
search/Auto-diagnosis |
| Test Scan Mode | Auto, Manual, External Trigger |
| Measurement Signal | Low Voltage Measurement Signal |
| Panel | System/Rapid /Edit / Function |
| Indicator | Pass/Fail HV LED red-green indicator
lights / Screen Display /Sound |
| Operation | Manual, Auto, Remote Control |
| Built-in Storage | Number of test file up to 500 sets |
| Power Supply | Fixed Voltage
115/230 Vac ±10% |
| Frequency
60/50Hz |
|
| Power consumption | 300VA |
| Environment | Temperature
0℃-40℃ |
| Humidity
RH≦75% |
|
| Display | 320*240 dot-matrix display |
| Dimension
(W*H*D) & Weight |
64PIN
435x145x406 mm 8.44Kg |
| 128PIN
435x145x406 mm 9.3Kg |
|
| Interface | RS-232, USB Host, Print, Remote |
To view the pdf files, the Adobe Reader from Adobe Systems is required.