This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
Compact and Lightweight
The VA-14 is a Vibration Analyzer with FFT analysis function that comprehensively includes the functions required for equipment diagnosis and on-site measurement. It is approx. 200 g lighter than the previous model VA-12 and becomes thin in shape, making it easier to hold with one hand. The new LAN terminal strengthens the connection with communication devices, allowing command control of the instrument and file transfer remotely. In addition, by installing the optional program VX-14S, it is possible to connect a microphone and measure sound. As a result, the VA-14 covers can cover not only vibration measurement but also sound frequency analysis and evaluation. It can be used in a variety of measurement situations, including measuring vibrations emitted by rotating objects such as machinery and motors, equipment diagnosis using vibration, and product research and development.
Vibration Analyzer
Model:
VA-12
Maker:
RION CO.,LTD.
Features
Vibration Meter Mode
-
Allows simultaneous measurement of acceleration, velocity,
displacement, and acceleration crest factor -
Filters (HPF, LPF) can be set for acceleration, velocity,
and displacement, respectively
FFT Analyzer Mode
- Real-time analysis frequency 20 kHz
-
Time waveform display and spectrum display with up to
3,200 spectral lines. Envelope processing also supported. - Simultaneous saving of linear average value and maximum value
- Two types of peak detection functions
- Displays top 10 spectra with “TOP10”
- Displays top 10 peaks with “PEAK10”
Videos
Specifications
| Standard compliance | |||
| CE Marking | EMC Directive: 2014/30/EU EN 61326-1: 2021 Low Voltage Directive: 2014/35/EU EN 61010-1:2010/A1: 2019 RoHS2 Directive: 2011/65/EU EN IEC 63000: 2018 |
||
| WEEE: Directive 2012/19/EU, China RoHS, KC Mark | |||
| Input function | |||
| Connector and type, etc. | BNC connector CCLD power supply 20 V, 2 mA |
||
| Sensor | Piezoelectric accelerometer PV-57I (accessory) | ||
| Input range | When the sensitivity is (0.100 to 0.999) mV/(m/s2) | ||
| Acceleration (ACC) | 10, 31.6, 100, 316, 1 000, 3 160, 10 000 m/s2 (rms) | ||
| Velocity (VEL) | 31.6, 100, 316, 1 000, 3 160, 10 000, 31 600 mm/s (rms) | ||
| Displacement (DISP) | 0.89, 2.83, 8.94, 28.3, 89.4, 283, 894 mm (EQ P-P) | ||
| When using PV-57I or the sensitivity is (1.00 to 9.99) mV/(m/s2) | |||
| Acceleration (ACC) | 1, 3.16, 10, 31.6, 100, 316, 1 000 m/s2 (rms) | ||
| Velocity (VEL) | 3.16, 10, 31.6, 100, 316, 1 000, 3 160 mm/s (rms) | ||
| Displacement (DISP) | 0.089, 0.283, 0.89, 2.83, 8.94, 28.3, 89.4 mm (EQp-p) | ||
| When the sensitivity is (10.0 to 99.9) mV/(m/s2) | |||
| Acceleration (ACC) | 0.1, 0.316, 1, 3.16, 10, 31.6, 100 m/s2 (rms) | ||
| Velocity (VEL) | 0.316, 1, 3.16, 10, 31.6, 100, 316 mm/s (rms) | ||
| Displacement (DISP) | 0.0089, 0.0283, 0.089, 0.283, 0.89, 2.83, 8.94 mm (EQp-p) | ||
| Measurement range (using PV-57I, high-pass filter 3 Hz, low-pass filter 5 kHz) | |||
| Acceleration | 0.02 m/s2 to 141.4 m/s2 (rms) (limited by maximum continuous measurement acceleration of PV-57I) | ||
| Instantaneous maximum acceleration | 700 m/s2 | ||
| Velocity | 0.2 mm/s to 141.4 mm/s (rms) (at 159.15 Hz input) | ||
| Displacement | 0.02 mm to 40.0 mm (EQ P-P) (at 15.915 Hz input) | ||
| Measurement frequency range | |||
| Acceleration | 1 Hz to 20 kHz | ||
| Velocity | 3 Hz to 3 kHz | ||
| Displacement | 3 Hz to 500 Hz | ||
| Acceleration envelope curve | 1 kHz to 20 kHz | ||
| Filter characteristics | Pre-filter Vibration severity (Velocity RMS values with a frequency range of 10 Hz to 1 kHz, in accordance with ISO 2954:2012. Corresponds to a velocity high-pass filter (HPF) at 10 Hz and a low-pass filter (LPF) at 1 kHz (-3 dB point). | ||
| High-pass filter (HPF) | 1 Hz (acceleration only), 3 Hz, 10 Hz, 1 kHz (-10% point) Cutoff slope -18 dB/oct |
||
| Low-pass filter (LPF) | 1 kHz, 5 kHz, 20 kHz (-10% point) Cutoff slope -18 dB/oct | ||
| HPF and LPF can also be set separately for acceleration, velocity, and displacement. | |||
| Calculation items | |||
| Vibration meter (VM) mode | |||
| Acceleration (ACC) | m/s2 RMS, PEAK, crest factor | ||
| Velocity (VEL) mm/s | RMS, EQPEAK (PEAK*1) | ||
| Displacement (DISP) | mm, μm RMS, EQPEAK, EQ P-P (p-p*1) | ||
| Time waveform (TIME) mode | Time waveform | ||
| Data type | ACC, VEL, DISP, Acceleration envelope curve | ||
| FFT analysis mode | Spectrum | ||
| Data type | ACC, VEL, DISP, Acceleration envelope curve | ||
| Time window functions | Rectangular, Hanning, Flat-top | ||
| Calculation | Instantaneous value, linear average, maximum value, exponential average (Linear average and maximum value should be able to be calculated and saved simultaneously.) |
||
| Average number | Maximum 2 048 times | ||
| Trigger | Trigger source | External trigger, Level trigger | |
| Trigger level | Steps of 1/8 of full scale on one-sided amplitude | ||
| Trigger slope | +/- | ||
| Pre-trigger | 1/8 frame | ||
| Trigger operation | |||
| Free | Calculation is carried out constantly, regardless of the trigger condition. | ||
| Repeat | Calculation is carried out every time the trigger condition is met. | ||
| Single | Calculation is carried out only once when the trigger condition is met. | ||
| Display | 3.5-inch TFT-LCD monitor In FFT analysis mode and time waveform (TIME) mode screens, the cursor position is controlled via the touch panel. |
||
| Warning indication | LED (lights up in red to indicate overload) | ||
| Memory | Memory media | SD cards (max. 32 GB)* | |
| Store mode | Manual | Measurement values and setting conditions are saved to a memory card. Up to 1,000 data sets can be saved under one store name, and up to 1,000 store names can be saved. | |
| Auto*1 | Up to 200 hours of continuous data can be saved under a single store name. Up to 1,000 store names can be saved. | ||
| Parameter setting memory | Up to 10 setting configurations can be saved in the device’s internal memory. Up to 1,000 configurations can be saved on an SD card. | ||
| Wave files | When operating in Vibration meter (VM) mode, the Auto store mode allows recording of vibration waveforms for up to 200 hours.*1 | ||
| BMP files | Screen capture can be saved as BMP files. | ||
| Recall function | Measurement data can be read from memory card and redisplayed on screen. | ||
| Resume function | Settings are memorized when power is turned off and can be restored at next power-on | ||
| Input/output section | Trigger input | TTL level, BNC-mini plug, 2.5 mm dia. (for CC-24) | |
| USB port (Type-C) | |||
| Command control | Settings can be retrieved and changed via communication commands. | ||
| Data transfer | Enables the transferring of data by making the computer recognize the SD card as a removable disk. | ||
| LAN | |||
| Command control | Setting retrieval and modification, as well as measurement value acquisition*1, are possible via communication commands. | ||
| Data acquisition | SD card can be accessed to retrieve data using FTP function | ||
| Power | DC12 V (5.7 to 15 V) | AC adapter NE-21P, six AA batteries (23℃, normal operation, backlight off) | |
| Battery life | Approx. 12 hours | ||
| Current consumption | 130 mA (normal operation, backlight off) | ||
| Power consumption | Approx. 1.5W (in case of AC 100 V (NE-21P)) | ||
| Operating temperature range, storage temperature range | |||
| Main unit | -10 ℃ to +50 ℃, 10% to 90% RH (no condensation) | ||
| Piezoelectric accelerometer PV-57I | -20 ℃ to +70 ℃, 90% RH or less | ||
| Dimensions, Weight | Approx. 238.9 mm (H) × 80 mm (W) × 44.5 mm (D), Approx. 665 g (including protective cover, batteries, and PV-57I) | ||
| Supplied accessories | Piezoelectric accelerometer PV-57I ×1, Curled cable (Attached to the PV-57I) ×1, Magnet attachment VP-53S ×1, Shoulder strap ×1, Size AA alkaline battery ×6, 512 MB SD card ×1 | ||




