This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
Four-wire testing technology to measure the continuity between connector points, avoiding measurement errors caused by excessive fixture wiring.
MICROTEST 8761NAK series Cable Harness Tester employs precise four-wire measurement technology to perform comprehensive electrical characteristic tests on wire harness products with low resistance levels of 1mΩ. The testing capabilities include continuity impedance, open/short circuit, AC/DC safety withstand voltage, IR insulation, and component testing (resistor/capacitor/diode). The testing points are selectable up to 512 points, with a maximum AC withstand voltage output of 700V and a maximum DC withstand voltage output of 1000V. It supports PC connectivity software and BAR Code scanning, meeting the requirements for automated line testing in wire and connector production.
Cable Tester 8761K Series
Model:
8761NAK, 8761NK
Maker:
MICROTEST Corporation
Features
- 4-wire measurement conductance 1mΩ-52Ω
- Low Resistance Scanning Test 10mΩ-52Ω
- Test pin 512
- Number of test file up to 500 sets
- Open/Short
- Conductance
- AC/DC Hipot Test
- DC insulation
- Support bar code scan and print function
Specifications
| 8761K Series | ||
| Model | 8761NAK | 8761NK |
| AC Hi pot Test | 100V-700V | – |
| DC Hi pot Test | 50V-1000V | 50V-1000V |
| Test Pin | 512 | |
SPEC
| Safety Hi pot Test | ||
| AC Hipot Leakage Current | 0.01mA -5mA | |
| AC Arcing Detection | 1-48 | |
| DC Hipot Leakage Current | 0.1μA-1000μA | |
| DC Arcing Detection | 1-48 | |
| DC Hipot Insulation Resistance | 0.1MΩ-1.2GΩ | |
| Hipot Output Accuracy | ±5% | |
| Hipot Measurement Basic Accuracy | ±5% | |
| Rated Output | 5Vdc | |
| Hipot Measurement Time | 0.01sec – 60sec | |
| Wire Specifications | Maximum allowable capacitance 5μF | |
| Low Voltage Electrical Test | ||
| Measuring Mode | 4-Wire Test | |
| Continuity Test | 1mΩ-52Ω | |
| Intermittence Continuity Test | 20-2KΩ | |
|
O/S Intermittence O/S Quick Intermittence open circuit |
1kΩ-100kΩ | |
| Low resistance Scanning | Measurement Range | 10mΩ-52Ω |
| Current Signal | 10mA | |
| O/S Determinal Judge | ● | |
| Single-Side Test | ● | |
| Component test | ||
| Resistance | Measurement Range | 50mΩ-20MΩ |
| Level Signal | 0.5-3V | |
| Current Signal | 10mA | |
| Capacitance | Measurement Range | 10pF-12μF |
| Level Signal | 0.3V-1.2V | |
| Frequency Signal |
AUTO Gear (Optional) 48Hz/480Hz/4.8kHz/48kHz |
|
| Diode | Measurement Range | 0-6.8V |
| Other Function | ||
| Advanced Functions | Programmable continuous test / Pin search/Auto-diagnosis | |
| Test Scan Mode | Auto, Manual, External Trigger | |
| Measurement Signal | Low Voltage Measurement Signal | |
| Panel | System/Rapid /Edit / Function | |
| Indicator | Pass/Fail HV LED red-green indicator lights / Screen Display /Sound | |
SYSTEM
| Operation | Manual, Auto, Remote Control | ||
| Built-in Storage | Number of test file up to 500 sets | ||
| Power Supply | Fixed Voltage | 115/230 Vac ±10% | |
| Frequency | 60/50Hz | ||
| Power consumption | 300VA | ||
| Environment | Temperature | 15℃-35℃ | |
| Humidity | RH≦70% | ||
| Display | 320*240 dot-matrix display | ||
|
Dimension(W*H*D) |
435x270x360 mm | ||
| Weight | 18kg | ||
| Interface | RS-232, USB Host, Print, Remote | ||




