This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
Two-wire testing technology to measure the continuity between connector points.
The MICROTEST 8740K Series Cable Harness Tester employs two-wire measurement technology and is suitable for products that do not require very low resistance measurements, considering the cost factors of the testing fixture. The testing capabilities include Continuity Test, open/short circuit, AC/DC safety withstand voltage, IR insulation, and component testing (resistor/capacitor/diode). The testing points can be selected up to 1024 points, with a maximum AC withstand voltage output of 700V and a maximum DC withstand voltage output of 1000V. It supports PC connectivity software and BAR Code scanning, meeting the requirements for automated line testing in wire and connector production.
Cable Tester 8740K Series
Model:
8740NAK, 8740NK
Maker:
MICROTEST Corporation
Features
- Test pin 1024
- Number of test file up to 500 sets
- Open/Short
- Conductance
- AC/DC Hipot Test
- DC insulation
- Quick conductance
- Multiple DUT test
- Support bar code scan and print function
- Automatically identify the normal or reverse plugin of wire or connectors
Videos
Specifications
| 8740K Series | |||
| Model | 8740NAK | 8740NK | |
| AC Hi pot Test | 100V-700V | – | |
| DC Hi pot Test | 50V-1000V | 50V-1000V | |
| Test Pin | 1024 | ||
SPEC
| Safety Hi pot Test | ||
| AC Hipot Leakage Current |
0.01mA -5mA (Must do correction before test when spec. is lower than 0.1mA) |
|
| DC Hipot Leakage Current | 0.1μA-1000μA | |
| DC Hipot Insulation Resistance |
0.1MΩ-1.2GΩ (Please read the manual carefully before doing this test) |
|
| Hipot Output Accuracy | ±5% | |
| Hipot Measurement Basic Accuracy | ±5% | |
| Rated Output | 5Vdc | |
| Hipot Measurement Time | 0.01sec – 60sec | |
| Wire Specifications | Maximum allowable capacitance 5μF | |
| Low Voltage Electrical Test | ||
| Measuring Mode | 2-Wire Test | |
| Continuity Test | Measurement Range | 100mΩ-52Ω |
| Current Signal | 35mA | |
| Intermittence Continuity Test | 20Ω-2KΩ | |
|
O/S Intermittence O/S Quick Intermittence open circuit |
1kΩ-100kΩ | |
| O/S Determinal Judge | ● | |
| Single-Side Test | ● | |
| Component test | ||
| Resistance | Measurement Range | 100mΩ-2MΩ |
| Level Signal | 2.4V (Fixed) | |
| Current Signal | 35mA | |
| Capacitance | Measurement Range | 10pF-3μF |
| Level Signal | 1.2V (Fixed) | |
| Frequency Signal |
AUTO Gear |
|
| Diode | Measurement Range | 0.1~6.8V |
| Advanced Functions | Programmable continuous test / Pin search/Auto-diagnosis | |
| Test Scan Mode | Auto, Manual, External Trigger | |
| Measurement Signal | Low Voltage Measurement Signal | |
| Panel | System/Rapid /Edit / Function | |
| Indicator | Pass/Fail HV LED red-green indicator lights / Screen Display /Sound | |
| Built-in Storage | Number of test file up to 500 sets | |
General
| Operation | Manual, Auto, Remote Control | ||
| Power Supply | Fixed Voltage | 115/230 Vac ±10% | |
| Frequency | 60/50Hz | ||
| Power consumption | 250VA | ||
| Environment | Temperature | 15℃~35℃ | |
| Humidity | RH≦70% | ||
| Display | 320*240 dot-matrix | ||
| Dimension (W*H*D) | 435x270x360 mm | ||
| Weight | 18Kg | ||
| Interface | RS-232, USB Host, Print, Remote | ||




