This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
Line Impedance Stabilization Network
The TNW-243F2 is a Line impedance stabilization network(LISN) used to measure interference voltage leaking from the interference sources due to the power supply line in the frequency range of 9kHz to 30MHz, in compliance with standards such as CISPR (International Special Committee on Radio Interference).
And this LISN can also be measured from single-phase to three-phase, four-wire systems, depending on the number of line phases provided. The measuring lines can also be switched using a remote switch in addition to the switch on the unit.
Additionally, by registering the correction factors of this device into radiation receiver manufactured by Kyoritsu Electronic Industry (KNM-2401, KNM-2402, KNM-2403, and KNM-S243), automatic addition can be performed through key operations, enabling direct reading measurement of interference voltage.
This product is build-to-order model
Line Impedance Stabilization Network
Model:
TNW-243F2
Maker:
Kyoritsu Technology Corporation
Specifications
| Frequency range | 9kHz to 30MHz |
| Applicable standards | CISPR 16-1-2, VCCI |
| Number of phase | Single, Three-phase 4-wire system |
| Circuit type | 50Ω |
| RF connector | 50Ω(BNC female) |
| Power Line Rating | AC/DC 440V, 30A |
| Standard accessories | Coaxial cable (BNCP-3D2W-BNCP, 5m) ・・・・・1pc. AC power cable (5m) ・・・・・・・・・・・・ 1pc. Remote switch ・・・・・・・・・・・・・・・・ 1pc. Remote switch cable(5m) ・・・・・・・・・・ 1pc. |
| Size | 520(W)x250(H)x420(D)mm |
| Weight | approx.19kg |
Note: Differences from TNW-243F
- Weight and dimensions (smaller and lighter)
- The SAFETY GROUND terminal has been removed.
- Equipped with a standard single-phase outlet on the OUTPUT side
- Control panel on the OUTPUT side




