This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
- Information Equipment / Software
- Industrial PC
- CONTEC CONPROSYS Nano Series Remote I/O - Communication Coupler / Modbus Slave / 8x Slot / 2x LAN CPSN-MCB271-1-081
I/O module expansion. Easy installation and removal of I/O modules
This product is a remote I/O model CPU unit that has LAN interfaces in addition to eight expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product can be controlled from a PC running Windows or Linux and supports Modbus TCP Slave and Modbus RTU Slave.
CONPROSYS Nano Series Remote I/O - Communication Coupler / Modbus Slave / 8x Slot / 2x LAN
Model:
CPSN-MCB271-1-081
Maker:
CONTEC Co., Ltd.
Features
- Ethernet based Robust remote I/O module for Modbus-TCP protocol : 8ch 16bit Analog Input / 4ch Digital Output
Ethernet (Modbus-TCP) based remote I/O with 8ch 16bit Analog Input / 4ch Digital Output. Communication control system can be constructed using generic LAN cables. - Virtual Channel to Channel Isolation / Common Voltage Protection
Analog input channels have ±400VDC virtual channel-to-channel isolation (leakage current less than 1μA) and ±200VDC common voltage protection, which prevents noise interference from adjacent channels and reduces measurement errors when multiple channels are connected. - Over-voltage Protection / Over-current Protection
Analog input channels have overvoltage protection and overcurrent protection, which prevents the module from being damaged by high voltage spikes or incorrect wiring, and protects the current measurement from being affected by high current and high voltage in the current loop. - Designed for a wide operating temperature range of -25 to 75°C (-13 to 167°F)
Designed to withstand a wide operating temperature range of -25 to 75°C (during operation) (-13 to 167°F). Robust design that can be used in outdoor environments with large temperature changes. - Dual watchdog function monitors module and communication failures
Dual watchdog function monitors module and communication failures. If an operational failure of the module is detected, it will automatically reset and return the signal output to the set value. If the communication command from the host is interrupted, the signal output will also return to the set value. This prevents damage and abnormal operation of the sensors/actuators connected to the module. - Robust ESD/EFT and surge resistance
Passes IEC 61000-4-5 surge testing, IEC 61000-4-2 ESD testing, and IEC 61000-4-4 EFT testing. Robust design resists noise, spikes, and high-voltage electrostatic discharges.
Specifications
Coupler module
| Series | CONPROSYS nano(Modular remote I/O) |
|---|---|
| Communication Protocol | Modbus RTU; Modbus TCP; MQTT; REST API ; SNMP |
| Stack bus | CONPROSYS nano stack bus |
| Number of Connecting Modules | 8-modules |
| Number of Ports | – |
System specifications
| Item | CPSN-MCB271-1-081 | |
|---|---|---|
| CPU | ARM Cortex-M3 180MHz | |
| Memory | On Board 16MB SDRAM | |
| ROM | On-Board 4MB NOR Flash for OS | |
| FeRAM | Unused. | |
| LAN | Transmission standard | 10BASE-T/100BASE-TX |
| The number of ports | 2 (contains a switch function) *1 | |
| Connector | RJ-45 Connector | |
| LED | Speed (Orange), Link / Act (Green) | |
| USB | Unused. | |
| microSD Card slot | Unused. | |
| Expansion slot | Number of slots | 8 |
| Maximum power supply | 12 -24V 200mA, 5V 250mA, 3.3V200mA (per slot) | |
| Number of insertions/removals | 50 times (min) | |
| LED | PWR(Green) / RUN(Green) / STS(Green) /ERR(Red) | |
| Switch | Push switch | |
| RTC | Monthly error | ±15 seconds or less (25°C) |
| Backup time | Not equipped with the date retention battery for backup | |
| Power supply *2 | Rated input voltage | 12 -24VDC |
| Input voltage range | 10.8 -30VDC | |
| Power consumption | <CPU Unit alone *3> 24V 0.08A (Typ.), 0.1A (Max.), 12V 0.15A (Typ.), 0.2A (Max.) <With I/O module > 24V 2.7A (Max.), 12V 3.6A (Max.) |
|
| Connector | 2 pieces 3.5mm pitch 3-pin Terminal (V+, V-, FG) | |
| Applicable wire | AWG24 -16 | |
| Surge protection element | V+ -V-, V- – FG Interactive TVS Diode Stand off voltage : ±30V, Peak pulse power : 400W (1ms) |
|
| Physical dimensions (mm) | 179(W) x 74.8(D) x 95(H)mm (not include projection) | |
| Weight | 350g | |
| Installation method | Quick installation on a 35 mm DIN rail Vertical installation with screws *4 |
|
*1 The CPSN-MCB271-1-041, CPSN-MCB271-1-081 model contains a switch function and can configure a network like daisy-chain connection between LAN A port and LAN B port.
*2 Use power cable within 3 meters.
*3 With no expansion slot load.
*4 Commercially available screws are required.
| Item | CPSN-MCB271-1-081 | |
|---|---|---|
| Operating ambient temperature | Vertical installation : -20 -+60°C Vertical installation with an angle of 90° to the left, Horizontal installation : -20 – +55°C Vertical installation with an angle of 90° to the right : -20 -+50°C |
|
| Operating ambient humidity | 10 -90%RH (No condensation) | |
| Non-operating ambient temperature | -20 -+60°C | |
| Non-operating ambient humidity | 10 -90%RH (No condensation) | |
| Floating dust particles | Not to be excessive | |
| Corrosive gases | None | |
| Line-noise resistance | Line noise | AC Line/±2kV *5 Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3) |
| Static electricity resistance | Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) |
|
| Vibration resistance | Sweep resistance | 10 -57Hz *6 /semi-amplitude vibration 0.15mm 57 – 150Hz/2.0G 40 minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant) |
| Shock resistance | 15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant) | |
| Grounding | Class D grounding (previous class 3 grounding), SG-FG/ non-conduction | |
| Standard | VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UKCA, ISED | |
*5 When an optional power product is used.
*6 When an optional power product is used : 10 – 55Hz (See the manual of optional power product for details)
Related Article
CONTEC Modbus-RTU RS-485 Remote I/O Power Relay Output 4ch / 4ch Digital Input (Counter) – CONPROSYS Robust I/O Series CPSR-M7060PDG
CONTEC Modbus-RTU RS-485 Remote I/O Digital Input (Counter) 8ch / 8ch Digital Output – CONPROSYS Robust I/O Series CPSR-M7055UDG
CONTEC Modbus-TCP Ethernet Remote I/O Photo MOS Relay Output 8ch – CONPROSYS Robust I/O Series CPSR-ET7066
To view the pdf files, the Adobe Reader from Adobe Systems is required.