ANRITSU METER Handheld Thermometer Model HR Series HR-1350K / HR-1350E

High function model. Can output measured values

Measurement Range
K -200 to 1370°C / E -200 to 800°C

HOLD
The thermometer stops measurement by the HOLD key and holds the present readings.

Auto power-off
The thermometer will turn the power off automatically after 5minutes.

Resolution change
Press the ［RESO］ key to change the resolution of readings.

P/V Hold
The peak (Max.) value and the valley (Min.) value can be displayed by the P/V HOLD key on the sub-display.

Backlight
The backlight will operate by the Backlight key and the LCD display will be visible even in a dark place.

Calibration
The displayed value can be adjusted the CAL SET key.

Alarm output
The thermometer gives an alarm when readings go beyond the high or low limits.

Made in Japan
Large easy-to-read LCD display

Handheld Thermometer Model HR Series

Model:

HR-1350K / HR-1350E

Maker:

ANRITSU METER CO., LTD.

Download Catalog

Features

Accuracy : ±(0.05% of reading + 0.2℃ at over 0℃)
Resolution : 0.1℃ or 1℃ (Changeable)
Analog output : 1mV/℃ or 10mV/℃ (Changeable)
Alarm output function
Dimensions : 82(W)×166(H)×36(D)
Weight : 350g (including batteries)
Power supply : 4AA Alkaline dry batteries or AC adaptor
Battery life : approx.600hours
Accessories : Test report, Soft case, Hand strap, 4AA Alkaline batteries, Manual, Alarm/Analog output cable

Line up

Model			HR-1100 HR-1150 HR-1650	HR-1200 HR-1250 HR-1750	HR-1300 HR-1350	HR-1301 HR-1351	HR-1400 HR-1450	HR-1500 HR-1550
Display			LCD				LED	LCD
Waterproof specifications/Equivalent to IPX5			✔	✔	–	–	✔	–
Input connector			ASP model：HR-10 /ANP model：HR-15
Input type			Thermocouple Input: Type E, K　(Not switchable)
Channel			1ch
Signal source resistance			MAX.1 Kohm
Measurement Range	1°C Resolution	E	-200～800°C
		K	-200～1370°C
	0.1°C Resolution	E	-104.9～504.9°C(Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
		K	-104.9～504.9°C(Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
Measurement Accuracy	1°C Resolution	0°C~	±(0.1% of reading +1°C)
		~0°C	±(0.5% of reading +1°C)
	0.1°C Resolution	0°C~	±(0.05% of reading + 0.2°C)
		~0°C	±(0.15% of reading + 0.2°C)
Reference junction compensation accuracy			±0.2°C at 25°C±10°C
Temperature Coefficient*1			HR-11:±0.02×Δt°C/HR-15:±0.03×Δt°C (Add the value obtained by multiplying the excess temp.Δt[°C] by a coefficient to the total accuracy. e.g. ±0.3°C is added at room temp. of 0°C or 50°C)
Operation Environment			0 to 50°C, 0 to 80%RH (Non condensing)
Storage Environment			-20 to 50°C, 0 to 85%RH (Non condensing)
Battery life			approx.900h	approx.900h	approx.600h	approx.20h*2	approx.300h	approx.550h
Power supply(Dry battery)			4 AA Alkaline batteries
Power supply(AC power)			–	–	available		–	available
Sampling rate			approx.200ms
Linearlizer			Digital Linearizer method (Compliant with IEC 60584-1 (2013))
Dimensions(mm)			approx. 82(w)×166(H)×36(D) [Protruded parts excluded]
Weight			approx. 350g [Include Batteries]
Supplied accessories			Manual,Test report,Soft case, Hand strap,4 AA Alkaline batteries
Optional accessories			–	–	Alarm output cable		–	Communication cable,software
						Analog output cable	–	–
Alarm Output			–	–	✔ TABLE1	✔ TABLE1	–	‐
Analog Output			–	–	–	✔ TABLE2	‐	‐
Memory function			–	–	–	–	–	✔ TABLE3
Compatible standards(CE)			EMC：EN61326-1：2013, EN 61326-2-1：2013 classA Table2（ Industrial） RoHS：IEC EN 63000：2018

*1 Only when the temp. exceeds 25°C ±10°C
*2 Approx. 400h when the analog output is switched always off.

Videos

Specifications

Model			HR-1350
Display			LCD
Waterproof specifications			–
Input connector			ANP
Input type			Thermocouple Input: Type E, K
Channel			1ch
Signal source resistance			MAX.1k ohm
Measurement Range	1°C Resolution	E	-200 to 800°C
		K	-200 to 1370°C
	0.1°C Resolution	E	-104.9 to 504.9°C (Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
		K	-104.9 to 504.9°C (Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
Measurement Accuracy	1°C Resolution	0°C to	± (0.1% of reading +1°C)
		to 0°C	± (0.5% of reading +1°C)
	0.1°C Resolution	0°C to	± (0.05% of reading + 0.2°C)
		to 0°C	± (0.15% of reading + 0.2°C)
Reference junction compensation accuracy			±0.2°C at 25°C±10°C
Temperature Coefficient*1			±0.03×Δt°C (Add the value obtained by multiplying the excess temp.Δt[°C] by a coefficient to the total accuracy. e.g. ±0.5°C is added at room temp. of 0°C or 50°C)
Operation Environment			0 to 50°C, 0 to 80%RH (Non condensing)
Storage Environment			-20 to 50°C, 0 to 85%RH (Non condensing)
Battery life			approx.600h
Power supply(Dry battery)			4 AA Alkaline batteries
Power supply(AC power) option			available
Sampling rate			approx.200ms
Linearlizer			Digital Linearizer method (Compliant with JIS C1602-2015)
Dimensions(mm)			approx. 82(w)×166(H)×36(D) [Protruded parts excluded]
Weight			approx. 350g [Include Batteries]
Supplied accessories			Manual,Test report,Soft case,
			Hand strap,4 AA Alkaline batteries
Optional accessories			Alarm output cable
Alarm output			TABLE1
Compatible standards			EMC：EN61326-1：2013, EN 61326-2-1：2013 classA Table2（ Industrial） RoHS：IEC EN 63000：2018

*1 Only when the temp. exceeds 25°C±10°C

Inquiry

High function model. Can output measured values

Features

Line up

Videos

Specifications

Related Article