global
Send us a message
product

ITEMLIST

Products Infomation

NetVision SVI-09 Parallel Image Recorder

with USB3.0 output, FPGA customization, stereo camera support, and real-time video analysis tools


Request a Quote
 

The NetVision SVI-09 is a parallel image recorder board designed for high-performance video input/output via USB3.0. Supporting resolutions up to 8190×4095 pixels, it offers 60 fps at 1920×1080 and 120 fps at 1280×720.

With FPGA plug-in capabilities, I2C camera/SerDes control, and GPIO expandability, it enables custom development and real-time video analysis.
Dual CMOS sensor inputs allow stereo camera prototyping, while built-in tools like histogram and vector scope displays support automotive, medical, IT, and research applications.

Parallel Image Recorder

Model:

SVI-09

Maker:

NetVision

Download Materials

Features

• Input / output with 2 ports of parallel 60 pins and 100 pins
• Input / output with USB3.0 (Vendor Class)
• FPGA plug-in functions for custom development

Applications

Display video signal of camera modules or CMOS sensors to DisplayPort monitor,
Around view development, Simultaneous monitoring of multiple sensors.
■ Application Areas
Automotive / transportation equipment, medical testing / analysis / measurement, IT / information / communications, software, education / research institutions, and so on.

Specification

Table Item Specification Remarks
Video input interface Parallel video signal Supports FPD-Link III, GMSL, GVIF2 as deserializer
Video output interface USB3.0 (Windows, Linux, UVC Driver)
USB3.0 Vendor Driver (Windows)
Special HDMI monitors are available individually
Input resolution Up to 8190×4095 pixel In the case of 1920×1080, about 60 fps
In the case of 1280×720, about 120 fps
Output bit rate within 3.0 Gbps In the case of 1920×1080 (UVC mode) about 80 fps
In the case of 1920×1080 (HDMI mode) about 60 fps
Supported sync signal Vsync, Hsync, Pixel Clock Supports Embedded Sync (BT.656),
Data Enable
Clock rate ~ 150 MHz
Supported pixel formats YUV422 (8 bit, 16 bit) / RGB24 /
Raw8, 10, 12
Input bit width 8 / 16 / 24 / 32 bit Use GPIO pins for 24 and 32 bit
Other interfaces I2C Frequency : 100 / 200 / 400 kHz Voltage level follows VDDL
GPIO Up to 16 bit, IN / OUT direction control every 8 bits Voltage level follows VDDL
Power supply Board power (input) USB bus power /
Dedicated 2pin connector (5V)
Target side power (output) VDDL & VDDH = 1.56 ~ 4.2 V
VDDP = 1.5 ~ 4.1 or 5.0 V
VDDL : IO power supply setting
VDDH : Power supply for connection board
VDDP : Auxiliary power supply for target device
Other functions Test pattern output function
Image clipping function
FPGA plug-in function
ROM startup : Function to automatically transmit SerDes setting file (I2C)
Interface connector 50 + 10 pin (A1-50PA-2.54DSA)
100 pin (LSHM-150-03.0-F-DV-A-N-K-TR)
10 pin is added for 24 bit or 32 bit input
Parallel 2ch / LAN / MIPI Interface can be supported individually with an expansion board using a 100 pin connector
FPGA Artix-7 (XC7A35T)
Frame memory 256 MByte (DDR3-SDRAM)
USB3.0 chip Cypress EZ-USB FX3
Dimensions length x width x height =
101.6 x 101.6 x 25.7 (mm)
Including spacer (10mm) in height
Attached software
Windows
Video display software NVCap, SVImon
I2C control software SVMCtl, SVICtl Including SV board update application
Supported SerDes boards of our company DS90UB914A, DS90UB934, MAX9272, MAX96706 etc.,

 

【SV series common specifications】
Application software:NVCap & SVMCtl, Test pattern output function, Image clipping function

Get Adobe' Reader'

To view the pdf files, the Adobe Reader from Adobe Systems is required.