-
【johoyd】Metallographic sample mounting machine XQ-2B
It is a necessary process before grinding and polishing with thermosetting polymer -
【johoyd】Automatic metallographic sample mounting machine HYXQZ-1
Metallographic specimen mount is a very important step in the process of metallographic specimen preparation -
【johoyd】Automatic metallographic sample mounting machine HYXQZ-2
Mount is important process, especially suitable for some tiny samples Suitable for that are difficult to operate or have irregular shapes -
【johoyd】Metallographic Sample Polishing Machine P-1
Can be used to polish the finely ground metallographic sample Stable rotation, low noise, convenient operation, high work efficiency -
【johoyd】Metallographic Sample Pre-grinding Machine M-2
Can be used for the fine grinding of metallographic samples Double-disc design and can be operated by two people at the same time -
【johoyd】Dual-disc dual-control touch screen metallographic sample grinding and polishing machine MP-2DT
After the sample is polished, a mirror-like surface can be obtained Which can make the speed infinitely adjustable between 50-1000r/min -
【johoyd】Automatic metallographic sample grinding and polishing machine HMP-1AB
Is single-disc automatic grinding and polishing machine pre-grinding Can adjust the rotation speed of the grinding head and the grinding -
【johoyd】Automatic metallographic sample grinding and polishing machine HMP-2AB
Is a single-disc automatic grinding and polishing machine It is stable rotation, low noise, long life, safety and reliability -
【johoyd】Metallographic Sample Cutting Machine Q-2
This machine uses a high-speed rotating sheet grinding which is suitable for straight cutting of harder metal materials -
【johoyd】Metallographic Sample Automatic Cutting Machine Q-100B
The machine is divided into manual and automatic cutting The machine can set the cutting speed for cutting different samples -
【johoyd】Metallographic Sample Cutting Machine LSQ-80
The machine adopts a fully enclosed double-layer shell structure which is safe and can cut in large quantities. -
【johoyd】Metallographic Sample Cutting Machine HQG-80
Can be used to cut general metallographic and petrographic materials It is a fully enclosed double casing structure and is equipped -
【johoyd】High Speed Precision Cutting Machine HQG-200D
Adopts touch screen and PLC control, with stable performance The surface of the cut sample is bright, flat, and free of burns -
【johoyd】Shore Hardness Tester LX-C
Is widely used in hardness measurement of rubber and plastic Also known as rubber hardness tester -
【johoyd】Digital Webster hardness tester SW-20
Also known as the clamp-type hardness tester On-site that can quickly test the hardness of aluminum alloys -
【johoyd】Portable Leeb Hardness Tester SHL-140
Can directly measure HRC, HRB, HL, HB, HV, Shore (HS) hardness values Equipped with D-type and DL-type impact bodies -
【johoyd】Portable Leeb Hardness Tester SHL-150
Displays Brinell (HB), Vickers (HV), Shore hardness (HS) values. Can be equipped with 7 different impact devices -
【johoyd】Portable Leeb Hardness Tester SHL-160
High-performance rechargeable battery, intelligent charge management Comes with embedded thermal printer, which supports on-site printing -
【johoyd】Automatic turret type micro hardness tester HV-1000Z
Is a high-tech product of optical and mechanical integration Has good reliability, operability and repeatability -
【johoyd】Digital display automatic turret micro hardness tester HVS-1000Z
Micrometer eyepiece can directly read the measurement length The turret can automatically switch the eyepiece and the indenter -
【johoyd】Touch screen digital display automatic turret micro hardness tester HVST-1000Z
High-magnification optical measurement system and optical dual-channel structure、optoelectronics, photocouple sensing
ITEMLIST
Products Infomation
CONTENTS：
