CONTENTS CONTENTS

Products

The products listed here are for overseas markets, not for Japan domestic.

ONOSOKKI Advanced Handy Tachometer FT-7200

An easy-to-use, highly functional, compact and handy high-performance digital tachometer

The FT-7200 Advanced Handy Tachometer is an easy-to-use, high-performance, compact handheld Digital Tachometer. It measures rotational speed using FFT (Fast Fourier Transform) calculations from various signals generated by motors and various rotating machinery, such as noise, vibration, or changes in magnetic flux. Even with complex waveform signals from sound level meters and vibration sensors, it reliably extracts frequency components corresponding to rotational speed using five measurement modes, accurately calculating and displaying the rotational speed.

Rotational speed measurement, which was difficult to perform using conventional methods due to hidden rotational axes in motors already integrated into products, can now be easily conducted using sound and vibration. There is no longer a need to attach reflective markers to the measurement object or to apply special processing to the rotational axis as before. Additionally, the FT-7200, equipped with a new algorithm, can calculate and display rotational speed with high responsiveness even for rapid changes in speed, such as during motor startup and deceleration. Being a battery-operated handheld type, it is convenient to carry to measurement sites and allows for easy measurement.

Advanced Handy Tachometer

Model:

FT-7200

Maker:

Ono Sokki Co., Ltd.

Features

  • Compact handheld type adopting FFT calculation method
  • You can select the optimal algorithm from 5 types of measurement modes.
  • Equipped with a tracking measurement algorithm capable of responding to rapid changes in rotational speed, such as during acceleration and deceleration.
  • Even if the rotational axis is hidden, the rotational speed can be calculated and displayed using sound and vibration.
  • The rotation of thin shafts of small (micro) motors and fan blades can also be measured non-contact.
  • A diverse lineup of sensors covering various rotational measurement applications.
  • Analog output function with averaging processing function.
  • Backlit LCD, large numeric display
  • FT-7200 Demonstration Instr

Advanced handheld tachometer FT-7200 Demonstration

Specifications

Measurement Department
measured object DC motor, compressor, engine, or general rotating body
calculation method FFT calculation method
measurement time within 250 ms
Input frequency range
2000 Hz range 30~2000 Hz(1,800~99,999 r/min)
500 Hz range 7.5~500 Hz(450~30,000 r/min)
250 Hz range 3.75~250 Hz(225~15,000 r/min)

However, in the case of 1 P/R.

measurement unit r/min (revolutions per minute)
Measurement accuracy (r/min) ±2 times the rotational speed resolution (r/min) ± 1 count

The accuracy of rotational speed depends on the frequency range.

Minimum rotational speed resolution (r/min) Frequency range (Hz) ÷ 6400 × 60 ÷ number of set pulses (P/R)

*When the rotation speed is accelerating or decelerating, the resolution becomes coarse.
6400 = 200 line × 32

filter function Limit the frequency range to be measured (rotational speed) within the selected frequency range.
averaging process Moving average processing
Average count: OFF, 2, 4, 8, 16
Sensor amplifier sensitivity adjustment volume The sensitivity of the sensor amplifier can be adjusted using the rotary volume control on the right side of the main unit.
detection section
compatible sensor
engine rotation OM-1200/OM-1500、IP-292、IP-296、IP-3000A、IP-3100、FT-0801*
vibration VP-202, VP-1220, NP-2000 series, NP-3000 series
sound MI-1433/MI-1235 (microphone) + MI-3111 (microphone preamp)
Others FT-0501+FT-0150

* Detection may not work properly depending on the type of engine and measurement target.
* FT-0801: Discontinued

voltage level 5 V:Max ± 5 V
0.5 V:Max ± 0.5 V
0.05 V:Max ± 0.05 V
Input combination AC coupling
Power supply for NP sensor Constant current power supply (2.4 ± 0.5 mA)
Display Section
Display digit count 5 digits
character height 10.2 mm
display LCD 7-segment display with backlight
Display update time 0.5 ± 0.2 seconds
display resolution 1 r/min
Measurement Mode Section
CNS(Constant) Modes A and B: Used when the variation in the rotational speed of the measured object is small (such as when measuring the rated rotational speed).
ACT(Active) Modes C, D, and E: Used when the rotational speed of the measurement target is accelerating or decelerating (however, measurements may not be accurate in cases of sudden changes).
Analog Output Section
[REVO] Analog Output
output content Output against the rotational speed display value.
voltage range 0 to 1 V / 0 to F.S. (F.S. can be set arbitrarily)
conversion method 10 bit D/A conversion method
linearity ±1 % of F.S.
Output update time within 250 ms
Temperature stability ±0.05 % of F.S./ ℃(Zero & Span)
setting error ±0.5% of F.S. (factory shipment adjustment setting error, Zero & Span)
load resistance more than 100 kΩ
Output Connector Mini mini jack (Φ2.5)
Analog output for monitor
output content Analog output for monitoring after waveform shaping of the sensor signal.
load resistance more than 100 kΩ
Output Connector Mini mini jack (Φ2.5 / shared with REVO output)
Pulse Output Section
signal content Frequency pulse of the power spectrum extracted by FFT processing.
output voltage Lo: below 0.5 V, Hi: above 4.5 V (without load)
Output update time Constant rotation mode: within 500 ms
Rotation acceleration/deceleration mode (Active): within 250 ms
load resistance more than 100 kΩ
Output Connector Mini mini jack (Φ2.5 / shared with REVO output)
General Specifications
Power Supply Four AA batteries ※ or PB-7090 dedicated AC adapter (optional)
continuous usage time Approximately 6 hours (when backlight is OFF)
Approximately 5 hours (when backlight is ON)
(アルカリ乾電池使用、20 ℃にて、NP センサー使用時を除く(*1))

(*1) NP センサーを使用する場合は定電流電源の駆動により消費電流が多くなるため専用 AC アダプターを使用することをお奨めいたします

Battery LOW indicator Lights up at approximately 4.2 V
Operating temperature range 0~+40 ℃
Storage Temperature Range −10℃~+50 ℃
Operating Humidity Range +35 to +85 % RH (no condensation allowed)
Storage Humidity Range +35 to +85 % RH (no condensation allowed)
Outline Dimensions 180.5 (L) × 66 (W) × 47.5 (D) mm (body only)
Weight approximately 280 g
Compliance standards (CE marking)
Low Voltage Directive 2014/35/EU Standard EN 61010-1
EMC instruction 2014/30/EU Standard EN 61326-1
RoHS Directive 2011/65/EU Standard EN IEC 63000
 
Accessories Carrying case, three types of instruction manuals.
Contact for price

Get Adobe' Reader'

To view the pdf files, the Adobe Reader from Adobe Systems is required.

Researched by Shared Research Inc.
about Nihon Denkei Co., Ltd.