This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Products
The products listed here are for overseas markets, not for Japan domestic.
- Information Equipment / Software
- Industrial PC
- CONTEC High-Speed Line Driver Output 4 Axis Motion Control Board for PCI Express SMC-4DL-PE
Capable of multi-axis independent control and pulse output up to 9.8Mpps. Capable of controlling the jogging at fixed speed or by linear/S-curve acceleration and deceleration, positioning, and origin returning
This product is a PCI Express board that supports stepping motors and (“pulse string input” types of) servomotors. SMC-4DL-PE can perform motor control for up to 4 axes. This product has the functions for positioning, origin return, linear interpolation, and for S-curve acceleration and deceleration, capable of multi-axial linear interpolation and speed/position overriding. This product covers a wide range of applications including semiconductor equipment, test instruments, multi-axis robots, and X-Y robots. These various functions make it possible to build complex positioning control systems for variety of uses such as manufacturing devices and test devices. Windows/Linux device driver is supported with this product.
High-speed line driver output 4-Axis Motion Controller Card for PCI Express
Model:
SMC-4DL-PE
Maker:
CONTEC Co., Ltd.
Features
- Capable of multi-axis independent control and pulse output up to 9.8Mpps
Control for up to 4 axes and motor control pulse output up to 9.8Mpps are available. Command pulse for motor control supports common pulse, independent pulse and 90° phase difference pulse. Limit input 3channels/axis, general-purpose input 7channels/axis, and general-purpose output 3channels/axis are equipped. Also, depending on the software setting, 5 general-purpose inputs can be used as alarm inputs, and general-purpose outputs as deviation counter clear outputs. - Capable of controlling the jogging at fixed speed or by linear/S-curve acceleration and deceleration, positioning, and origin returning
Carrying a motor control IC in the PCL6100 series from Nippon Pulse Motor Co., Ltd., capable of controlling jogging, positioning, origin returning, synchronization control and linear interpolation. - Provided with various input/output formats enabling connection to an encoder input circuit as well as pulse output circuit.
Encoder input circuits can be connected with differential output, TTL level output, and open-collector output. Pulse output circuits can be connected with differential input, opto-coupler and TTL level input. - With the multi-axis synchronization control function, capable of aligning the timing for operation start and end
Synchronization control of multi-axis simultaneous start/stop control, linear interpolation operation is available. - Capable of speed and position overriding
Capable of changing the speed and target position during operation. - Comparator circuits allowing the set value and counter value to be compared
A pair of comparator circuits is provided for each axis, allowing the set value and counter value to be compared with each other. They also allow signals to be output while comparator conditions are met.
Specifications
Add-on Module
| Series | – |
|---|---|
| Bus Specification | PCI Express |
| Size | Short Size |
| Used Connector | 2x 0.8mm-pitch 100-pin (Female) |
Motion Control
| Number of Channels | 4-ch |
|---|---|
| Pulse Rate | 0.3 ~ 9.8Mpps |
Counter
| Number of Channels | 4-ch |
|---|---|
| Counting System | 28-bit Up/Down count |
| Response speed | 5MHz [differential]; 3MHz [TTL]; 1MHz [open collector output] |
Supported OS
| Supported OS | Windows 11 (64-bit); Windows 10 IoT Enterprise LTSC 2021 (64-bit); Windows 10 IoT Enterprise 2019 LTSC (64-bit); Windows 10 IoT Enterprise LTSB 2016 (64-bit); Windows 10 (64-bit); Windows 10 (32-bit); Windows 8.1 (64-bit); Windows 8.1 (32-bit); Windows 7 (64-bit); Windows 7 (32-bit); Windows Vista (64-bit); Windows Vista (32-bit); Windows XP (64-bit); Windows XP (32-bit); Windows 2000 (32-bit); Windows Server 2008 (64-bit); Windows Server 2008 (32-bit); Windows Server 2003 (64-bit); Windows Server 2003 (32-bit); Linux |
|---|
* The supported OS differs depending on the software used for this product. For more details about supported OS and distribution, please refer to the software Readme or online help.
Related Article
To view the pdf files, the Adobe Reader from Adobe Systems is required.