ANRITSU METER High Superior for Stationary Surface Probes Model S-1,2,3 Series S-121K-01-0-TC1-ANP

Highest levels of accuracy,response time and durability.

Model S series probes are high-performance temperature sensors developed using Anritsu Meter's full range of proprietary technologies to achieve the highest levels of accuracy, response time, and durability.Specific components may be combined to customize products for the needs of a customer's specific application.

High Superior for Stationary Surface Probes Model S-1,2,3 Series Series

Model:

S-121K-01-0-TC1-ANP

Maker:

ANRITSU METER CO., LTD.

Download Catalog

Features

No grip type
Temperature range :-50 to 800°C
Tolerance :±2.5°C (at 100°C surface)
Response time :1s
Durability :More than 60,000 contacts(at 800°C surface)

Specifications

Model number^*1		S-11* S-21* S-31*	S-12* S-22* S-32*
Thermocouple type		Type E or K
Temp. range^*2		-50 to 300°C	-50 to 800°C
Tolerance^*3	-50°C	±2.5°C	±2.5°C
	0°C	±2.5°C	±2.5°C
	100°C	±2.5°C	±2.5°C
	200°C	±2.5°C	±2.5°C
	300°C	±2.5°C	±2.5°C
	400°C	–	±3.0°C
	500°C	–	±3.8°C
	600°C	–	±9.0°C
	700°C	–	±10.5°C
	800°C	–	±16.0°C
	Tolerance calculation method t:Temperature(°C)	At within temperature range 1)-50°C ≦ t < -40°C:±2.5°C 2)-40°C ≦ t ≦ 500°C:±2.5°C or ± (0.0075 × \| t \|)°C, whichever is greater 3)500°C < t ≦ 700°C:±(0.015×\|t\|)°C 4)700°C < t ≦ 800°C:±(0.02×\|t\|)°C
Calibration points of test report		100, 200, 300°C	100, 300, 500°C
Response time^*4		0.1 to 0.15 s(63.2%) 0.3 to 0.4 s(90%) 1 s(99%)
Durability^*5		More than 100,000 contacts at 300°C	More than 60,000 contacts at 800°C
allowable tilt		S-11* : ±4° S-21* : ±8° S-31* : ±4°	S-12* : ±4° S-22* : ±8° S-32* : ±4°
head material		Liquid Crystal Polymer	Stainless(SUS303)
Pipe material		Stainless(SUS316)
Contact strip material		Heat resistant alloy t=100μm
Grip material		Polyacetal
Repair^*6		Repairable

*1 The asterisk (*) is replaced by the number of the model name you selected. The model number after thermocouple type is omitted.
*2 The operating temperature limit is determined by the allowable temperature limit　of the sensor head contacts the measurement target. Note that the operatingtemperature limit is not the same as the allowable temperature limits of the grip, cable, and plug.
*3 Tolerance is available at -50°C or above within the operating temperature on a stationary flat and smooth metal surface. For tolerance at temperature not listed in the above table, please refer to calculation method of tolerance.
*4 The response time is the time required to detect the true value on a flat and smooth metal surface.
*5 Number of contacts enabling measurement within the tolerance range on a flat and smooth metal surface.
*6 Please refer to page repair.

Inquiry

Highest levels of accuracy,response time and durability.

Features

Specifications

Related Article