This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
ITEMLIST
Products Infomation
- Products by Category
- Electronic Measuring Instruments
- Tachometers ・ Stroboscopes
- ATSENSE Pulse Shaper PS-100
Pulse Shaper PS-100
[Contact Us]
The ATSENSE PS-100 Pulse Shaper is a compact, high-speed conditioning unit designed for engine R&D.
When connected to the CLP-10 Clamp-on AC Pickup, it converts ignition charge/discharge and injection timing currents into stable 0–5V pulse signals.
With four input channels, adjustable trigger levels, and noise-reducing low-pass filters, it delivers reliable digital signals within 3μs. Its robust aluminum housing, wide 9–32V DC supply range, and easy BNC connections make the PS-100 an indispensable companion for accurate ignition and injection timing analysis.
Features
■ 4-channel input
■ The analog signal from the CLP-10 Clamp on AC Pickup is converted to a digital signal and output
■ The trigger level can be set in 4 steps
■ A low pass filter provides noise reduction
■The trigger level and low pass filter can be set for each of channels 1, 2 and channels 3, 4.The white line is the wave shaped output from the PS-100.
The white line is the wave shaped output from the PS-100.
PS-100 output waveform chart
Specification
| Input/output connector | BNC |
| Number of channels | 4ch |
| Detector | CLP-10 Clamp on AC Pickup |
| Input circuit adjustment | 1) TRG (trigger level) switch: 4-step switching±0.5, ±1V, ±2V, ±5V 2) LPF (low pass filter) switch: 4-step switching The above settings are performed for each of 2 chs of CH1, 2 and CH3, 4 by the panel switch. |
| Output circuit | For both TTL input and contact input (external pull-up voltage maximum 30V) |
| Output rating | H(5V) level 3.5V or more (4mA)、L(0V) level 1.5V or less (10mA) |
| Output logic | Output H level during ignition and injection drive current energizing |
| Indicator | Lights at output H level: Green element green light LED |
| Response speed | Within 3μs after trigger level is exceeded at the input terminal |
| Signal insulation | None (input/output ground common) |
| Power input range | DC9 to 32V (5W), reverse polarity connection prevention (automatic reset), signal insulation |
| Power supply connector | f5.5×2.1 standard DC jack (center + polarity) |
| Body case | Aluminum case, anodizing treatment |
| External dimensions & weight | W:140 H:40 D:100 (excluding projecting parts), weight: Approx. 400g |
| Operating temperature range | -10°C to 50°C (no condensation) |
| Accessories | AC adaptor × 1, DC plug cable × 1, adhesive rubber foot × 4 |
To view the pdf files, the Adobe Reader from Adobe Systems is required.