This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

ITEMLIST
Products Infomation

Oscillation Frequency: 0.01 µHz to 30M Hz!
WAVE FACTORY products boast accurate and stable output, an abundance of output waveforms, various oscillation modes for various purposes, outstanding user-friendliness and the flexible generation of waveforms that engineers need.
NF considers oscillators that offer the flexible generation of waveforms as the standard, and we continue to offer function generators with ever more advanced functions.
Multifunction Generator
Model:
WF1947 / WF1948
Maker:
NF Corporation
Features
Low noise
The noise level is reduced to roughly one-tenth of those of previous models* at comparatively high voltage output (about 2Vp-p/50Ω, without DC superposition) and within frequencies of up to 300kHz. By employing an attenuator, the noise level at the low voltage output of about 1Vp-p or lower has been reduced to between a half and one-third those of previous models. In all of the output ranges, dramatic noise reduction has been realized, which makes this product perfect for a wide range of uses.
Low distortion
A complete revision of the circuitry has realized the generation of low-distortion sine waves with total harmonic distortion of 0.04% or less. In addition to the 16-bit resolution of waveform amplitude, high-quality sine waves are produced.(Frequency setting range: 20Hz-20k Hz, amplitude: 0.25Vp-p/50Ω or greater)
Waveform amplitude resolution: 16 bits
The circuit structure we developed has realized a 16-bit resolution of waveform amplitude, which is the highest of any oscillator designed for a maximum frequency of 30MHz. High-quality 16-bit resolution of waveform amplitude is provided for all the waveforms you might need, including sine, square and arbitrary waveforms.
High amplitude setting accuracy
The auto range function facilitates the optimum selection of output voltage range, according to the amplitude and DC offset (including high/low level settings) settings. Further, by reducing the deterioration of the amplitude setting accuracy due to the setting level, it is possible to obtain a very high amplitude setting accuracy.
Floating
Each output terminal is insulated from the housing, which makes it possible to connect the terminal to equipment with dissimilar electric potentials. The inclusion of floating output terminals reduces noise caused by ground loops.
Low fan noise
The rotational frequency (OR revolution per minute) of the fan is controlled according to the detected ambient temperature. At normal room temperature, excluding start-up and abnormal operation, the noise is one-tenth of that of previous models*.
*Previous models : WF1973/WF1974
Use
• Ultrasonic motor drive test, differential input / balanced input test, LCD panel operation test, digital circuit evaluation test, evaluation of various ICs
• Simulation of gear rotation signal/Inverter evaluation/ABS・Power Steering Device Test/ECU・ sensor operation test
• Echo canceller test, amplifier and speaker tone burst test / linearity measurement, wireless communication equipment evaluation test