KIKUSUI Compact Wide Range DC Power Supply PWR-01 Series

Sequence function(supports triggered synchronization)
This function automatically executes the pre-set contents (program) one operation at a time. Sequence programs cannot be set from the panel. It is created using commands. Once a sequence program is executed by remote control, the program is written to this product and can be executed from the panel. Once the program is written to this product, the program can be executed without a PC.
 
Synchronized Operation
This function synchronizes the resumption of a setting or Sequence function with a Trigger signal, allowing each model in the PWR-01 series (e.g., 400 W model and 800 W model, etc.) to be mixed and connected. Synchronous operation is possible even in Parallel operation. Synchronous operation requires various settings to be made by remote control using commands, but after the settings are made, synchronous operation can be performed without a PC.
 

• Variable internal resistance function
• LAN (LXI compliant) /USB/RS232C as standard interface
• A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient
• A wide range of voltage and current settings can be combined within its output power rating (3 to 4 times)
• All models are equipped with front-facing output terminals as standard (maximum 10A)
• Supporting universal input voltage (85V to 265V)
• CONFIG setting shortcut function and display (Up to three parameters can be registered.)
• Setting preset memory function (3 combinations of settings for voltage, current, OVP, OCP, and UVL)
• Bleeder (sink) can be turned on/off, with an even stronger bleeder mode setting available
• Output-on/off delay function
• Soft start/stop function