Product Details
DC Voltage Current Source
6146 / 6156
Embedded power source or signal source in a board tester
Control boards used in home electric appliance and industrial equipment undergo functional tests at shipping and incoming inspections. The 6146/6156 can be used as embedded power source in a board tester, applying voltage to a board under test and applying voltage or current as pseudo sensor signal. As the 6146/6156 stabilizes its output values with a settling time of 10 ms or less, the time of a multi-item test can be reduced. In addition, the 6146/6156 is equipped with GPIB and USB interfaces for remote control as standard, allowing highly flexible system architect.
The 6146/6156 supplies power and applies voltage as pseudo sensor signal to the board under test. The 6146 has a minute voltage resolution of 1μV and the 6156 has that of 100nV. Thus, the 6146/6156 can be used as a substitute for sensor signal and make correct PASS/ FAIL judgment on the board.
■Advantages of the open clean system KOACH
①Low cost ② Can be used immediately after installation③ Energy saving ④ Clean-up in 30 seconds to a few minutes after switching on
■ Advantages of Table Coach: tabletop, portable, most appropriate for laboratories and testing rooms.
Cleanliness: ISO1 class. Total ventilating duration 110 seconds (set wind speed: 0.4m/sec)
■ Advantages of Stand Coach: No need for laborious and costly works, easy movement with wheels, side-by-side & face-to-face operation possible, no need of surrounding, good workability. Cleanliness: ISO1 class. Total ventilation duration 105 seconds.
■Semiconductors (basic processes & assembly processes), precision equipment, solar cells, batteries, etc.
■ Laptop PCs, smartphones, memory of wearable terminal PCs, diodes, CPU, touch panels, power devices, tablets, etc.
DC Voltage Current Source
6146 / 6156