SUGA Image Clarity Meter ICM-1T | NIHON DENKEI (MALAYSIA) SDN.BHD.

The ICM-1T measures the product's reflexibility, a crucial value that determines the product's quality.

ICM-1T determines the image clarity (also known as DOI - distinction of image) of an object appearing on coating, painted aluminum, and other materials. It also measures the distinction of an object seen through a transparent film or plastics. Currently, ICM-1T is widely used for checking gloss of ink-jet paper and for quality control of materials whose finishing is very important.

Image Clarity Meter

Model:

ICM-1T

Maker:

Suga Test Instruments Co., Ltd.

Specification

Measuring method (Use)	Transmittance (plastic films and others) and reflectance
Measuring method (Use)	(coatings, paintings, colored aluminum, paper, films for LCD, and others)
Values to be measured	Image clarity C %, maximum reflectance (transmittance) M, minimum reflectance (transmittance) m
Measuring angles	Transmittance:0゜incidence and viewing of transmitted light Reflectance: 45゜incidence and viewing, or 60゜incidenceand viewing (Either of the angles can be selected by switching.)
Slit	0.03 mm (JIS K 7105, JIS K 7374) or 0.1 mm (JIS H 8686-2),either to be selected upon request
Aperture	Φ25 mm
0ptical comb width	0.125 mm, 0.25 mm, 0.5 mm, 1.0 mm, and 2.0 mm
Allowance	Within 0.2 % standard deviation of C (subject to the light passing the 0.125-mm wide optical comb and transmitted through air)
Electrical requirements	Single-phase, 100 V, approx. 2 A
External dimension and weight	Optical unit: Approx. Width 70 cm, Depth 48 cm, and Height 31 cm; approx. 35 kg
External dimension and weight	Operation unit: Approx. Width 23 cm, Depth 33 cm, and Height 16 cm; approx. 4 kg
Related standards	JIS K 7105, JIS K 7374, JIS H 8686-2; ASTM D5767; and ISO 10216

Inquiry