This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
ITEMLIST
Products Infomation
- Products by Category
- Electronic measuring instruments
- Circuit ・ Element ・ Parts evaluation measuring instruments
- MICROTEST LCR Meter 6630
Measures component/material parameters from 10Hz to 50MHz, with automatic recognition for optimal selection in passive component testing.
MICROTEST 6630 LCR tester provides a wide frequency range of 10Hz to 50MHz for measuring component/material impedance characteristics. Measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (loss factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative dielectric constant), and μr (relative permeability). With a rapid measurement speed of up to 3mS, it's the ideal choice for automated inductance testing. It supports LAN/USB Host/USB Device/GPIB/RS-232 communication interfaces and can be integrated with automated equipment or human-machine interfaces (PLC).
LCR Meter
Model:
6630
Maker:
MICROTEST
Automatic Production Line
Connect 6630 RS-232, LAN, GPIB or Handler to automatic machine (measuring speed<3mS)，automated production is the most efficiency.
List Mode
50 groups of list mode setting (Each group contains up to 15 steps).
Four Parameters Displayed Simultaneously
7.0”TFT, 800×480 color screen, and four parameters can displayed simultaneously.
Features
- Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
- Basic accuracy up to ±0.05%
- Automatic Level Control (ALC)
- Output impedance 25Ω/100Ω, switchable
- Support meter mode and list mode
- Ultra-high measuring speed < 3ms
- Open circuit/short circuit/load correction function
- Comparator function
- BIN classification function
- Built-in the Permeability-μr
- Built-in the Dielectric constant-εr
Application
Using the magnetic material test fixture for measuring of permeability of various toroidal cores or ferrite cores and electromagnetic shielding coating materials, 6630 built-in formula to directly calculate the permeability coefficient value μr
6630 built-in formula to directly calculate the material dielectric value εr ‘/εr “
Using the dielectric material test fixture for measuring PCB board or ceramic board.
Using the liquid dielectric material test fixture for measuring the characteristics of electrochemical materials.
- _Dielectric Material Test Fixture (FX-0000C7)
- _Liquid Dielectric Material Test Fixture (FX-000C20)
Optimal Choice for Automated Production Testing of Inductors
Functions and Specifications
| Model | 6630 |
| Frequency Range | 10Hz-50MHz (6630-50)
10Hz-30MHz (6630-30) 10Hz-20MHz (6630-20) 10Hz-10MHz (6630-10) 10Hz-5MHz (6630-5) 10Hz-3MHz (6630-3) 10Hz-1MHz (6630-1) |
| Frequency Setting | Continuity |
| Frequency Resolution | ±0.01% |
| Frequency Output Accuracy | 100mHz, 6-bit Frequency Input |
| Basic Accuracy | typical ±0.05% |
| AC Drive Level | Test Signal Voltage Level
10mV – 2Vrms(100Ω) 10mV – 1Vrms(25Ω) |
| Voltage Minimum Resolution
1mV |
|
| Accuracy
ALC ON：6％ * Voltage ±2mV ALC OFF：10％ * Voltage ±2mV |
|
| Test Signal Current Level
200µA – 20mArms |
|
| Current Minimum Resolution
10µA |
|
| Accuracy
ALC ON：6％ * Current ± 20µA ALC OFF：10％ * Current ± 20µA |
|
| DC Drive Level | 1V (fixed) |
| Output Impedance | 25Ω/100Ω (switchable) |
| Measurement Mode | Meter mode, list mode |
| Measurement Parameters | |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、ε and μr |
| Test Time (Fastest) | < 3mS |
| Parameters | Range |
| |Z| | 0.000 mΩ to 9999.99 MΩ |
| R, X | ± 0.000 mΩ to 9999.99 MΩ |
| |Y| | 0.00000 μS to 999.999 kS |
| G, B | ± 0.00000 μS to 999.999 kS |
| θRAD | ± 0.00000 to 3.14159 |
| θDEG | ± 0.000° to 180.000° |
| Cs, Cp | ± 0.00000 pF to 9999.99 F |
| Ls, Lp | ± 0.00 nH to 9999.99 kH |
| D | 0.00000 to 9999.99 |
| Q | 0.00 to 9999.99 |
| Δ | ± 0.00% to 9999.99% |
| Rdc | 0.00 mΩ to 99.9999 MΩ |
| εr’ εr” | 0 to 100000 |
| μr’ μr” | 0 to 100000 |
| Measurement Circuit | Series/Parallel |
| Correction | Open Circuit/Short Circuit/Load correction |
| Cable Compensation | 0 / 0.5 / 1 /2 (m) |
| BIN | ABS、ΔABS、Δ%、OFF |
| Comparator | 9 |
| List Mode | 50 groups of Multi-steps setting (Each group contains up to 15 steps) |
| Bulit-in Storge | 100 sets LCR setting documents, 50 groups of list mode setting |
| USB Host Storge | LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data |
| Trigger Test | Auto, manual, RS-232, GPIB, Handler |
| Power Supply | Voltage：90-264Vac |
| Frequency：47-63Hz | |
| Power consumption | 30VA |
| Environment | Temperature：10℃-40℃ |
| Humidity：20-90%RH | |
| Dimension | 336x147x340 mm (W*H*D) |
| Weight | 3 Kg |
| Interface | RS-232、Handler、LAN、USB Host、USB Device |
| Display | Color Screen, 7″ TFT (800*480) |
To view the pdf files, the Adobe Reader from Adobe Systems is required.