This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.


ITEMLIST
Products Infomation

Sound source for all kinds of acoustic measurements.
* White and pink noise based on m-sequence pseudo random noise
* M-sequence repeat cycle 12 hours (logical value), with 50 kHz sequence clock
* Nine selectable 1/1 octave band filters with center frequencies from 31.5 Hz to 8 kHz. Multiple adjacent bands can be selected and used together.
*Choice of noise output modes: continuous, automatic burst, manual, extremal trigger
*Integrated serial interface allows external control from a computer
*Side-mounted connector panel allows use of the unit in an upright position
Random Noise Generator
Model:
SF-06
Maker:
RION CO.,LTD.
Specifications
Output frequency range | White noise, pink noise Bandwidth 20 Hz to 20 kHz | ||
Octave bands | 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz | ||
Filter section | Octave band filters Standard compliance JIS C 1514: 2002 class 1 IEC 61260: 1995 class 1 |
||
Output signal level | Approx. 5.6 Vrms (white noise AP value, ATT 0 dB) | ||
Output level range | 0 to -60 dB (variable in 2-dB steps) | ||
Output connectors | Noise output: BNC-P / XLR-3-32 (1 each) Output load impedance 50 kΩ or higher |
||
Noise generator | DSP creates m-sequence pseudo random noise | ||
All-pass | White noise or pink noise, bandwidth 20 Hz to 20 kHz | ||
Octave-band noise | 31.5 Hz to 8 kHz, single band or combination of adjacent bands | ||
Burst function | CONT | Continuous output | |
BURST | Automatic intermittent signal output Separate settings for on and off time, range 1 to 9 seconds |
||
MAN | Manual signal output control | ||
External trigger input | Enables on/off switching using external contacts | ||
Display | 3-digit LED indicators | Shows attenuation, burst time, or transfer rate (selectable) | |
Communications | RS-232C interface, 9-pin D-sub connector Transfer rate 9.6 k,19.2 k, 38.4 k bps selectable |
||
External I/O | EXT TRIG IN | Can be connected to external contact circuit to turn oscillation on and off | |
SYNC OUT | At ground level during noise output, high impedance in no-noise state | ||
ID setting | Setting range 00 to 7F (00 to 127) | ||
Power requirements | 100 V to 250 V AC, 50/60 Hz, approx. 20 VA | ||
Ambient conditions for operation | -10 °C to +50 °C, 30 % to 90 % RH (no condensation) | ||
Dimensions and weight | 168 (H) x 198 (W) x 270 (D) mm, approx. 3 kg | ||
Supplied accessories | 3P power cord x 1 (AA-38-222) 3P-2P adapter x 1 Cannon cable (5 m) x 1 |