RION Random Noise Generator SF-06 | Nihon Denkei India Private Limited


Products Infomation

RION Random Noise Generator SF-06

Sound source for all kinds of acoustic measurements.

* White and pink noise based on m-sequence pseudo random noise
* M-sequence repeat cycle 12 hours (logical value), with 50 kHz sequence clock
* Nine selectable 1/1 octave band filters with center frequencies from 31.5 Hz to 8 kHz. Multiple adjacent bands can be selected and used together.
*Choice of noise output modes: continuous, automatic burst, manual, extremal trigger
*Integrated serial interface allows external control from a computer
*Side-mounted connector panel allows use of the unit in an upright position

Random Noise Generator







Output frequency range White noise, pink noise Bandwidth 20 Hz to 20 kHz
Octave bands 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz
Filter section Octave band filters
Standard compliance
JIS C 1514: 2002 class 1
IEC 61260: 1995 class 1
Output signal level Approx. 5.6 Vrms (white noise AP value, ATT 0 dB)
Output level range 0 to -60 dB (variable in 2-dB steps)
Output connectors Noise output: BNC-P / XLR-3-32 (1 each)
Output load impedance 50 kΩ or higher
Noise generator DSP creates m-sequence pseudo random noise
All-pass White noise or pink noise, bandwidth 20 Hz to 20 kHz
Octave-band noise 31.5 Hz to 8 kHz, single band or combination of adjacent bands
Burst function CONT Continuous output
BURST Automatic intermittent signal output
Separate settings for on and off time, range 1 to 9 seconds
MAN Manual signal output control
External trigger input Enables on/off switching using external contacts
Display 3-digit LED indicators Shows attenuation, burst time, or transfer rate (selectable)
Communications RS-232C interface, 9-pin D-sub connector
Transfer rate 9.6 k,19.2 k, 38.4 k bps selectable
External I/O EXT TRIG IN Can be connected to external contact circuit to turn oscillation on and off
SYNC OUT At ground level during noise output, high impedance in no-noise state
ID setting Setting range 00 to 7F (00 to 127)
Power requirements 100 V to 250 V AC, 50/60 Hz, approx. 20 VA
Ambient conditions for operation -10 °C to +50 °C, 30 % to 90 % RH (no condensation)
Dimensions and weight 168 (H) x 198 (W) x 270 (D) mm, approx. 3 kg
Supplied accessories 3P power cord x 1 (AA-38-222)
3P-2P adapter x 1
Cannon cable (5 m) x 1

Get Adobe' Reader'

To view the pdf files, the Adobe Reader from Adobe Systems is required.