RION 2-Channel Charge Amplifier UV-16 | Nihon Denkei India Private Limited

Maximum of 16 units and 32 channels.

The UV-16 is a 2-channel charge amplifier that is compatible with the input of piezoelectric accelerometers and accelerometers with built-in preamplifier.
A multi-channel charge amplifier can be configured by together a maximum of 1 6 units and 32 channels.

2-Channel Charge Amplifier

Model:

UV-16

Maker:

RION CO.,LTD.

Features

Equipped with LCD display, overload indicator LED, operating switch, input/output terminals, power input terminals and coupling connectors
It can be mounted on JIS standard racks even with a small number Of channels (max. 12 units, 24channels)
AC adapter or battery unit BP-17 can be used as the power source

Specifications

Input
	Channels		2
	Connector		Microdot connector
	Types		Piezoelectric accelerometer Accelerometer with built-in preamplifier 24 V, 4 mA
Measurement modes and units			ACC (acceleration): m/s², VEL (velocity): mm/s, DISP (displacement): mm
Sensitivity setting
	Setting range		0.100 to 0.999 in 0.001 intervals 1.00 to 9.99 in 0.01 intervals 10.0 to 99.9 in 0.1 intervals
	Units		pC/(m/s²) (piezoelectric accelerometer) mV/(m/s²) (accelerometer with built-in preamplifier)
Range			7 stages (selected value range differs with the sensitivity setting)
	In the case of 0.100 to 0.999 sensitivity
		ACC (acceleration)	10, 30, 100, 300, 1 000, 3 000, 10 000
		VEL (velocity)	10, 30, 100, 300, 1 000, 3 000, 10 000
		DISP (displacement)	1, 3, 10, 30, 100, 300, 1 000
	In the case of 1.00 to 9.99 sensitivity
		ACC (acceleration)	1, 3, 10, 30, 100, 300, 1 000
		VEL (velocity)	1, 3, 10, 30, 100, 300, 1 000
		DISP (displacement)	0.1, 0.3, 1, 3, 10, 30, 100
	In the case of 10.0 to 99.9 sensitivity
		ACC (acceleration)	0.1, 0.3, 1, 3, 10, 30, 100
		VEL (velocity)	0.1, 0.3, 1, 3, 10, 30, 100
		DISP (displacement)	0.01, 0.03, 0.1, 0.3, 1, 3, 10
Frequency range
	ACC (acceleration)		1 Hz to 15 kHz (current AC output tolerance ± 5 %) 0.5 Hz to 30 kHz (current AC output tolerance ± 10 %)
	VEL (velocity)		3 Hz to 3 kHz (current AC output tolerance ± 5 %)
	DISP (displacement)		3 Hz to 500 Hz (current AC output tolerance ± 10 %)
Filter			Settable to HPF or LPF by channel
	HPF		OFF, 10 Hz, 20 Hz, 50 Hz
	LPF		1 kHz, 3 kHz, 10 kHz, OFF
Display			Segment LCD with backlight
	Display content		Settings, bar graph (100 ms cycles)
Warning display			LED × 2 Overload indication: red (by channel)
Output signal for calibration			Sine wave, 80 Hz ±5 %, output signal 1 V (peak) ±2 %
Output (current output)
	Output terminals		BNC connector × 2
	Output impedance		50 Ω (load resistance 10 kΩ or more)
	Output voltage precision		80 Hz full scale
		ACC (acceleration)	1V（Peak）±2 ％
		VEL (velocity)	1V（Peak）±3 ％
		DISP (displacement)	1V（Peak）±5 ％
	Max. output voltage		±10V（Peak）or more
	Cross talk between channels		−80 dB or less (Both channels: sensitivity: 5.00, range: 100, acceleration, input signal: 10 kHz)
Inherent noise			When input capacitance: 1 000 pF, sensitivity: 5.00, piezoelectric accelerometer, HPF: off, LPF: off, minimum range
	ACC (acceleration)		0.01 m/s²(RMS) or less
	VEL (velocity)		0.1 mm/s(RMS) or less
	DISP (displacement)		0.0015 mm(RMS) or less
Power requirements			DC9 V to 15 V Compatible AC adapters: NC-99A Special battery unit: BP-17
Resume function			Settings are retained in memory when the power requirement is turned off and are restored when the power requirement is turned on again
Ambient conditions for operation			-10 °C to +50 °C, 90 % RH or less (no condensation)
Dimensions and weight			150 (H)× 36 (W)× 179 (D) mm, Approx. 500 g
Accessories			Coupling plate × 1

Inquiry