NOISEKEN Electrostatic Discharge Simulator ESS-S3011A/GT-30RA/GT-30R3302KA | Nihon Denkei India Private Limited


Products Infomation

NOISEKEN Electrostatic Discharge Simulator ESS-S3011A/GT-30RA/GT-30R3302KA

EN/IEC 61000-4-2 Ed2 & ISO 10605 Ed2 Compliant SMART ESD simulator which supports all phases of the test (Pre to Post)

“NoiseKen” ESD simulators can reproduce and simulate the ESD from a charged human body intentionally for testing whether electronic equipments become malfunctioned or work correctly with the ESD influence, and the simulators conform to IEC61000-4-2 Standard which is standardized by International Electrotechnical Committee (IEC).

Electrostatic Discharge Simulator


ESS-S3011A & GT-30RA / GT-30R3302KA




  • EN/IEC 61000-4-2 Ed2 Compliant
  • ISO 10605 Ed2 Compliant (Note: Optional gun head and CR units are required.)
  • Pre-test
    “3 pre-checking functions” taking the confirmable test into the account
    “CR constant indicator” to ensure correct attachment is in place
  • During test
    “Ten-key & Rotary knob” to ease the setting
    “Infra-red Remote Controller” to allow remote Generator setting
    “Discharge Detecting Function” to realize the air-discharge confirmation
    “Lightest Discharge Gun in the market” for better continuous operation
    “White LED light” to show Discharging points
  • After test
    “Control Software” for Test Result Reporting and PC Control
    free-downloadable from NoiseKen web-site

ESS-S3011A : Product video full version & ESD Simulator ESS-S3011A/GT-30RA



ESD Simulator Main Unit ESS-S3011A

Items ESS-S3011A specifications
Polarity Positive or negative
Output voltage 0.2 to 30.0kV +/-5% (30.5kV Maximum)
0.2 to 10kV: 0.05V step,  10.0 to 30.0kV: 0.1kV step
Repetition cycle 0.05s to 99.9s +/-10% / Manual
0.05s to 10.0s: 0.05s step,  10.0 to 99.9s: 0.10s step
No. of time of discharge 1 to 60,000 times /continuous
 Discharge mode Contac discharge / Air discharge
Radiation level mode Normal mode / Extra mode
Trigger mode Gun trigger / Main unit trigger / External trigger
Operation panel Color LCD / Push-buttons (Partially lighting)
Gun holder Standard attached (to hold the discharge gun Model GT-30RA)
Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge mode equipped
Pre-checking function Following 3 steps function equipped (by under operation. Not the calibration but just checking)
SETP1 High voltage output checking
STEP2 Withstanding voltage checking
STEP3 Discharge relay operation checking
CR & Gun head checking  CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
IEC standard test mode Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step
Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step
Manual test mode Contact/Air discharge mode: 0.20kV to 30.0kV
Sweep function available
Up to 50 units (test settings) storable
Sequence test mode Seamless run of the selected test sequence
No. of steps per one sequence: up to 22 steps
No. of test sequences: up to 20
Warning lamp Lights up while the HV circuitry is on.
Blinks while discharges are in progress.
Charging capacitor and resistance 150pF +/-10%, 330 ohm+/-10%  (built into Discharge Gun GT-30RA)
Main unit charging resistance 10M ohm (53M ohm for combination with Discharge Gun GT-30RA)
AUX connector D-SUB 15 pin, female connector
Connection of Warning Lamp (optional)
Connection of Automatic ESD Eliminator (optional)
External interlock input
External trigger input
Optical communication connector Optic connector for PC communication (serial interface)
Power supply/ Power consumption 100V to 240V AC, 50Hz/60Hz +/-10%  75VA
Included accessories Remote controller 13-00004A, Gun holder, Instruction manual
Dimensions and weight  (W) 270 X  (H)312 X  (D)295 mm
Approx. 7.0kg (gun holder excluded)  , Approx. 7.5kg (gun holder included)


■ Discharge Gun GT-30RA Conforming to IEC 61000-4-2

Items Specifications
Output voltage 0.20~30.0kV ±5% (with ESS-S3011A/B3011A)
0.20~16.0kV ±5% (with ESS-L1611A)
Discharge mode Air discharge and contact discharge
Discharge waveform parameters Compliant with EN/IEC61000-4-2
Standard energy storage capacitor 150 PF±10%
Standard discharge resistor 330ohm±10%
Charging resistor 43Mohm
(53M ohm for combination with ESS main unit)
Cable length 2 m
Dimensions 83.4(W) x 217.2(H) x 189.3 (D) mm
(Discharge tip excluded)
Weight Approx. 1300g  (cable and high voltage connector included


■ Discharge Gun GT-30R3302KA Conforming to ISO10605

Items GT-30R3302KA
Output voltage 0.20~30.0kV ±5% (with ESS-S3011A/B3011A)
0.20~16.0kV ±5% (with ESS-L1611A)
Discharge mode Air discharge and contact discharge
Output polarity Positive / negative
Standard energy storage capacitor 150 PF±10% , 330 PF ±10%
Standard discharge resistor 330 ohm±10% & 2K ohm ±10%
Charging resistor Contained in the CR unit
Cable length 2 m
Charged voltage hold time 5 seconds or more
Dimensions 83.3(W) x 217.2(H) x 229.3 (D) mm
(Discharge tip excluded)
Weight Approx. 1300g  (cable and high voltage connector included)

Get Adobe' Reader'

To view the pdf files, the Adobe Reader from Adobe Systems is required.

Researched by Shared Research Inc.
about Nihon Denkei Co., Ltd.