NF Bipolar DC Power Supply BP series | Nihon Denkei India Private Limited

Wide Range Output Area Voltage / Current 4 Quadrants Operation 10 Models, ±10A to ±100A!

BP series can output in four quadrants and is capable of handling two directions of current, which are source (supply) and sink (absorption) current.
You can drive from devices that generate back electromotive force such as solenoids, capacitive load such as electrolytic capacitor, and even to piezoelectric material charged with electromotive force and power sources and batteries.

Bipolar DC Power Supply

Model:

BP series

Maker:

NF Corporation

Download Materials

■ Specification Download ■

Features

Voltage ± 60 V, 120 Vp-p
The output range can be shifted to – 5 V to + 115 V and – 115 V to + 5 V (Output current range changes)
With the lineup from + / -10 A to + / -100 A
Low amplitude frequency response ( BP4610 BP4620 )
DC to 200 kHz (CV, adjusted characteristics, amplitude 12 Vp-p)
DC to 70 kHz (CC, adjusted characteristics, amplitude 12 Vp-p)
Sequence Function
BP series has a built-in sequential signal source.
• Number of steps : 1 to 255 (within 1 sequence)
• Step time : 0.1 ms to 999.9999s (resolution 0.1 ms)

Use

As an ISO 16750-2:2006 standard compliance test equipment
Using BP series with multi function generator WF1973/WF1974, You can conduct an ISO 16750-2:2006 standard compliance test.
As a constant current power supply for generating magnetic field
In electromagnetic field test, constant current needs to be supplied to the coil for stable generation of constant magnetic field.
As a constant current power supply for capacitor ripple test
Using this power supply, you can perform ripple test on the units using capacitor(s) such as inverters.

Inquiry