This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
ITEMLIST
Products Infomation
- Products by Category
- Electronic Measuring Instruments
- Voltage, Current, Power Measuring Instruments
- KIKUSUI Digital Multimeter DME1600 Series
Essential device of “Electronic Measurement”, supporting basic measurement with variety of options
The DME1600 is a digital multi-meter with a resolution of 6 1/2 digit. It can be performed up to 2000 times per second at the setting condition of 4 1/2 digit as fastest measurement, and it can measures 50 times per second when it is set for the 6 1/2 digit. The DME1600 offers fully function of measurement for the voltage, current, resistance, frequency and temperature which can be used various application of measurement and evaluation in design, development and debugging of electronics devices. The DME1600 provides USB and GPIB interface as standard feature for automated measurement besides manual operation. Furthermore, the DME1600 offers wide range of options such as 20-channel multi-point scanner card supporting the basic measurement.
Digital Multimeter
Model:
DME1600 Series
Maker:
KIKUSUI ELECTRONICS CORPORATION
Features
- Resolution : 6 1/2 digit
- Display : 5 x 7 dot matrix VFD, dual display with 3-color
- Basic measurement function
DC voltage : 0.1 V, 1 V, 10 V, 100 V, 1000 V
AC voltage : 0.1 V, 1 V, 10 V, 100 V, 750 V
DC current : 10 mA, 100 mA, 1 A, 3 A
AC current : 1 A, 3 A
2-wire / 4-wire resistance : 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ, 100 MΩ
Frequency : 3 Hz to 300 kHz
Continuity test
Diode test
Temperature test - Built-in USB Interface (GPIB Interface *selected model)
*Model with GPIB Interface : DME1600GC
Specifications
| Item | Specifications |
|---|---|
| Input voltage range | 100 Vac/120 Vac/220 Vac/240 Vac ± 10 % (single phase) |
| Input frequency range | 50 Hz/60 Hz±10 % |
| Power consumption | 25 VAmax |
| Operating temperature range | 0 °C to 50 °C |
| Operating humidity range | Up to 80 % rh (0 °C to 31 °C, non condensing) |
| Storage temperature range | -40 °C to 70 °C |
| Operating altitude | Up to 2000 m |
| Dimensions/Weight | 224(8.82)W×113(4.45)H×373(14.69)D mm(inch) Approx. 3.7 kg (8.2 lb) |
| Interface | USB 2.0, GPIB (factory option) |
| Safety *1 | Complies with the requirements of the following directive and standard. Low Voltage Directive 2014/35/EU EN 61010-1 (Class I, Pollution degree 2), EN 61010-2-030 |
| Electromagnetic compatibility (EMC) *1, *2 | Complies with the requirements of the following directive and standard. EMC Directive 2014/30/EU EN 61326-1 (Class B ) EN 55011 (Class B, Group 1) EN 61000-3-2, EN 61000-3-3 |
| Accessories | “Power cord” 1 pc. (with three-pronged plug), “Standard test leads” (1 red, 1 black), “USB cable” 1pc., “Fuse”(spare) 1pc., “CD-ROM”*1pc., “Packing list,safety precautions” (1 English, 1 Japanese) *Contains the user’s manual and the remote interface manual. |
*1 Does not apply to specially made or modified DME1600s.
*2 Limited to products that have the CE/UKCA mark on their panels.
*3 This is a Class I equipment. Be sure to ground this product’s protective conductor terminal. The safety of this product is only guaranteed when the product is properly grounded.
*4 Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional temporary conductivity caused by condensation.
*5 This is a Class A equipment. This product is intended for use in an industrial environment. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
*6 This is a Group 1 equipment. This product does not generate and/or use intentionally radio-frequency energy, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose.
*7 Contains the User’s Manual and the Remote Interface Manual.
To view the pdf files, the Adobe Reader from Adobe Systems is required.