Semiconductor manufacturing is conducted in a high-level dust-free room. Manufacturing management and the creation of a clean environment for fine processing are the most important issues for maintaining quality!

The semiconductor manufacturing process requires a wide variety of inspections, including resistance measurement and appearance inspection. In addition, since the manufacturing process varies depending on the materials and products, it requires a tremendous number of man-hours and a wide range of process. Therefore, it is an extremely important task to improve the accuracy of the appropriate clean environment and to operate efficient manufacturing and inspection sites. Semiconductor manufacturing used in a wide variety of electronic devices requires the creation of environments with higher precision.

The Stand Koach is an unenclosed clean bench that forms a dust-free zone in any space in the room.
It is possible to form a dust-free zone with a high degree of cleanliness by simply installing them facing each other, so that the work space can be effectively used and the work can be done with a sense of openness for the operator, thus workability is not compromised. With wheels, you can easily change the layout. It is also possible to work with multiple people facing each other.

We were able to respond to the demands of those who wanted “dust-free space even though it is much narrower” to introduce it as soon as possible if it were a little bit cheaper” by making a hood smaller. Table Coach KOACH T 500-F can also be lifted by a single person with 100V power supply with low power consumption. All of KOACH can realize ISO class-1 cleanliness at laboratories, at manufacturing sites or at any locations. ※The figure on the right shows the air flow simulation.

• Low cost
• Can be used immediately after installation
• Energy saving
• Clean-up in 30 seconds to a few minutes after switching on

Advantages of Table Coach

• Tabletop, portable, most appropriate for laboratories and testing rooms.
• Cleanliness: ISO1 class. Total ventilating duration 110 seconds (set wind speed: 0.4m/sec)

Advantages of Stand Coach

■Semiconductors (basic processes & assembly processes), precision equipment, solar cells, batteries, etc.

■ Laptop PCs, smartphones, memory of wearable terminal PCs, diodes, CPU, touch panels, power devices, tablets, etc.