NF DaqBoard / 3000USB Series 3005USB | Nihon Denkei Co.,Ltd. Singapore Branch

USB 1 MHz, 16-Bit Data Acquisition Boards

icon 16ch single-ended/8ch differential input
icon 16-bit A/D use
icon N/A analog output
icon 24ch digital input/output
icon Software

DaqBoard / 3000USB Series

Model:

3005USB

Maker:

NF Techno Commerce Co.,Ltd.

Download Materials

Download Catalog

Features

Designed for OEM and embedded applications
Custom versions available for OEMs (contact factory)
16-bit, 1 MHz A/D converter
Up to 32 differential or 64 single-ended analog inputs, four of which can accept thermocouples
Up to four 16-bit, 1 MHz analog outputs
24 high-speed digital I/O lines
Four 32-bit counters with quadrature encoding support
Low-latency set point control output mode
Small, compact design (6” x 5.93”)

Line up

Model	Analog Inputs	Analog Outputs	Digital I/O	Counters	Timers
DaqBoard/3005USB	16SE/8DE	0	24	4	2
DaqBoard/3001USB	16SE/8DE	4	24	4	2
DaqBoard/3035USB	64SE/32DE	0	24	4	2
DaqBoard/3031USB	64SE/32DE	4	24	4	2

Note: Up to 4 of the analog inputs can be used to measure thermocouples

Specifications

General

Model	Power Consumption (Typical)†
/3001USB	3000 mW
/3005USB	2000 mW
/3031USB	3400 mW
/3035USB	2400 mW

† An optional power adapter (TR-2) will be required if the USB port cannot supply adequate power. USB2 ports are, by USB2 standards, required to supply 2500 mW (nominal at 5V, 500 mA).

Voltage Range^*	Accuracy ±(% of reading + % Range) 23°C ±10°C, 1 year	Temperature Coefficient ±(ppm of reading + ppm Range)/°C -30°C to 13°C and 33°C to 70°C	Noise^** (cts RMS)
-10V to 10V	0.031% + 0.008%	14 + 8	2.0
-5V to 5V	0.031% + 0.009%	14 + 9	3.0
-2V to 2V	0.031% + 0.010%	14 + 10	2.0
-1V to 1V	0.031% + 0.02%	14 + 12	3.5
-500 mV to 500 mV	0.031% + 0.04%	14 + 18	5.5
-200 mV to 200 mV	0.036% + 0.05%	14 + 12	8.0
-100 mV to 100 mV	0.042% + 0.10%	14 + 18	14.0

* Specifications assume differential input single channel scan, 1-MHz scan rate, unfiltered, CMV=0.0V, 30 minute warm-up, exclusive of noise, range -FS to +FS

** Noise reflects 10,000 samples at 1-MHz, typical, differential short

Common specifications

Item	Specification
Environment
Operating Temperature	-30 to +70 ˚C
Storage Temperature	-40 to +80 ˚C
Relative Humidity	0 to 95% non-condensing
Communications & Data
Communications Speed	USB 2.0 high-speed mode (480 Mbps) if available, otherwise, USB 1.1 full-speed mode (12 Mbps)
Acquisition Data Buffer	1 MSample
Vibration	MIL STD 810E Category 1 and 10
Connectors
Signal I/O Connectors	68-pin standard “SCSI type III” female connector (P5); four 40-pin headers (J5, J6, J7, J8), AMP# 2-103328-0
Temperature Measurement Connector	4-channel TC screw-terminal block (TB7); Phoenix # MPT 0.5/9-2.54
External Power
Connector	Switchcraft#RAPC-712
Power Range	6 to 16 VDC (used when USB port supplies insufficient power, or when an independent power supply is desired)
Over-Voltage	200V for 10 seconds, max
Physical Dimensions
Dimensions	152.4 mm W x 150.62 mm D (6.0” x 5.93”)
Weight	147 g (0.32 lbs)

Inquiry