NOISEKEN Lightning Surge Simulator LSS-6330 series

A tester simulatively generates "High energy induced lightning noise" which induced to distribution lines or communication lines by ground potential fluctuation caused by lightning strikes.

Lightning Surge Simulator

Model:

LSS-6330 series

Maker:

NOISE LABORATORY CO.,LTD.

Features

Conforming to IEC 61000-4-5 Ed.3, IEC61000-4-12 Ed.3（RINGWAVE 100kHz）and ANSI IEEE62-45(2002)
Pre-checking function simplifies start-up inspection works.
Voltage and current monitors enable status monitoring during noise applied to EUT.
Large LCD operation panel improve visibility and operability.
MPU control function simplifies continuous testing, enables automatic surge-out, waveform-switching and polarity switching.
Equipped with both manual and program mode to simplify test condition setting. Manual mode: for standard and single-shot testing. Program mode: for different testing in succession.
Interlocking function provides excellent safety.
Standardly equipped waveform checking terminals provide easy output waveform checking with existing oscilloscope and BNC cables.
Isolation transformer available for safety protection for superimposing circuit current leakage and back surge to power source.(Option)

Lightning Surge Simulator LSS-6330 series

Specification

■ Surge generator unit　LSS-6330-A20 / -B63 both applicable ■

Item	Specification		Note
Coupling Surge Waveform	1.2/50μs-8/20μs combination 10/700μs-5/320μs combination RING WAVE
1.2/50μs-8/20μs combination	Output voltage(open circuit)	0.5kV-6.7kV ±10%	Coupling circuit: 18μF Cable length: 0.5m on one side Line input side open
	Front time voltage waveform ／ Duration	1.2μs ±30％ / 50μs ±20％
	Output current(short circuit)	250A- 3350A ±10％
	Front time current waveform ／ Duration	8μs ±20％/ 20μs ±20％
10/700 μs-5/320μs combination	Output voltage(open circuit)	0.5kV-6.7kV ±10%	Cable length: 0.5m on one side
	Front time voltage waveform ／ Duration	10μs ±30％/ 700μ s±20％
	Output current(short circuit)	12.5A-167.5A ±10％
	Front time current waveform ／ Duration	5μs ±20％ / 320μs ±20％
RING WAVE	Output voltage(open circuit)	0.25kV-6.6kV ±10%	Cable length: 0.5m on one side
	Front time voltage waveform	0.5μs ±30％
	Frequency	100kHz ±10%
	Attenuation	Pk2 = 40% ＜ Pk1 < 110%Pk2 = 40% ＜ Pk1 < 110%
		Pk3 = 40% ＜ Pk2 < 80%Pk3 = 40% ＜ Pk2 < 80%
		Pk4 = 40% ＜ Pk3 < 80%
	Output current(short circuit)	8.3-550A±10%
	Front time current waveform	0.2-1μs
Polarity	Positive / Negative
Output impedance	2Ω±10%		1.2/50μs waveform
	40Ω±10%		10/700μs waveform
	12Ω±20%、30Ω±20%		RING （selective)
Surge generation circuit	Floating
Minimum charging time	0.0kV-4.0kV：5 s、　4.1kV-6.7kV：10 s		1.2/50μs waveform
	0.0kV-4.0kV：10 s、　4.1kV-6.7kV：15 s		10/700μs waveform
	0.0kV-4.0kV：1 s、　4.1kV-6.6kV：3 s		RING WAVE
Communication	RS-232C (Optical connector), Bluetooth		Option
	External CDN control
Emergency stop	Push-lock（Test STOP, High voltage OFF, EUT switch SHUT OFF)
Interlock function	External connection status detection
Emergency lamp	Red LED blinking after start the tests
Emergency lamp connector	Equipped with emergency lamp connectors. Lamp blinking after start the tests.		３ports
EUT Fail	3 ports
Voltage monitor	BNC output、2000V/V ±10％		Simplified open circuit surge out checking
Current monitor	BNC output、1000A/V ±10％		Simplified short circuit surge out checking
Phase angle control	0°-360°±10°		Operates at EUT power supply AC90V min. & 50Hz / 60Hz ± 10%
Trigger input	Asynchronous, AC line synchronous 0°-360° / 1° step external input
Drive power supply	AC100V-AC240V ±10％　50Hz / 60Hz ±10％
Operating environment	Temperature: 15-35℃ Humidity: 25-75％RH
Dimensions/ Weight	W430×H371×D530 mm / Approx. 55kgs

■ Superimposed Output Section　LSS-6330-A20 ■

Item	Specification		Note
Coupling Surge Waveform	1.2/50μs-8/20μs combination, RING WAVE
1.2/50μs-8/20μs combination	Output voltage	0.5kV-6.7kV ±10%	Coupling circuit: 18μF Cable length: 0.5m on one side Line input side open
	Front time/ Duration	1.2μs ±30％ / 50μs ±20％
	Short-circuit current	250A-3350A ±10％
	Front time/ Duration	8μs ±20％/ 20μs ±20％
	Output voltage	0.5kV-6.7kV ±10%	Coupling circuit: 10Ω+9μF Cable length: 0.5m on one side Line input side open
	Front time/ Duration	1.2μs ±30％ / 50μs +10μs /-25μs
	Short-circuit current	41.6A-558A ±10％
	Front time/ Duration	2.5μs ±30％/ 25μs ±30％
RING WAVE	Output voltage	0.25kV-6.6kV ±10%	Coupling circuit：4.5μF Cable length: 0.5m on one side Line input side open
	Front time	0.5μs ±30％
	Frequency	100kHz ±10%
	Attenuation rate	Pk2 = 40% ＜ Pk1 < 110%Pk2 = 40% ＜ Pk1 < 110%
		Pk3 = 40% ＜ Pk2 < 80%Pk3 = 40% ＜ Pk2 < 80%
		Pk4 = 40% ＜ Pk3 < 80%
	Short-circuit current	8.3 ～ 550A±10%
	Front time	0.2 ～ 1μs
EUT power capacity	AC240V/20A MAX 50/60Hz、DC125V/20A MAX
Decoupling coil	1.5mH
Voltage drop	Less than 10% of rated voltage when rated current is applied		At the output terminal of the AC superposition section
Residual voltage	15% or less of the applied surge voltage or twice or less of the rated voltage (peak value) of the power supply line

■ Superimposed Output Section　LSS-6330-B63 ■

Item	Specification		Note
Coupling Surge Waveform	1.2/50μs-8/20μs combination, RING WAVE
1.2/50μs-8/20μs combination	Output voltage	0.5kV-6.7kV ±10%	Coupling circuit: 18μF Cable length: 0.5m on one side Line input side open
	Front time/ Duration	1.2μs ±30％ / 50μs ±20％
	Short-circuit current	250A-3350A ±10％
	Front time/ Duration	8μs ±20％ / 20μs ±20％
	Output voltage	0.5kV-6.7kV ±10%	Coupling circuit: 10Ω+9μF Cable length: 0.5m on one side Line input side open
	Front time/ Duration	1.2μs ±30％/ 50μs +10μs /-25μs
	Short-circuit current	41.6A-558A ±10％
	Front time/ Duration	2.5μs ±30％/ 25μs ±30％
RING WAVE	Open voltage	0.25kV-6.6kV ±10%	Counpling circuit: 4.5μF Cable length: 0.5m on one side Line input side open
	Front time	0.5μs ±30％
	Frequency	100kHz ±10%
	Attenuation rate	Pk2 = 40% ＜ Pk1 < 110% Pk3 = 40% ＜ Pk2 < 80% Pk4 = 40% ＜ Pk3 < 80%
	Short-circuit current	8.3-550A±10%
	Front time	0.2-1μs
EUT power capacity	AC600V/63A MAX 50/60Hz、DC125V/63A MAX
Decoupling coil	1.5mH
Voltage drop	Less than 10% of rated voltage when rated current is applied		At the output terminal of the AC superposition section
Residual voltage	15% or less of the applied surge voltage or twice or less of the rated voltage (peak value) of the power supply line
Phase angle control	0°-360° ±10°		Operates at EUT power supply AC90V min. & 50Hz / 60Hz ± 10%
Drive power supply	AC100V- AC240V ±10％　50Hz / 60Hz ±10％
Operating environment	Temperature：15-35℃ Humidity: 25-75％RH
Dimensions	W430 × H695 × D686 mm

*Requires an isolation transformer separately.

Inquiry