This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.


ITEMLIST
Products Infomation

Magnet wires, printed circuit boards, connectors, semiconductors, small motors, electrostatic chucks and insulating materials
Since DAC-PD-7 contains the necessary circuits for PD testing, such as the test power supply, detector, coupling capacitor and calibrator, it can easily perform partial discharge tests with only the main unit. Partial discharge testing to judge the quality of magnet wires, printed circuit boards, connectors, semiconductors, small motors, electrostatic chucks and insulating materials can be easily performed. PD tests according to the international standard (IEC 60270, 60664-1. 61730-2) are available with the PC software.
Partial Discharge Tester
Model:
DAC-PD-7
Maker:
SOKEN ELECTRIC CO.,LTD.
PC Software
Voltage-Discharge Quantity Characteristic Test
AC test voltage is linearly increased to the max test voltage/PD Inception voltage, and automatically decreased.
PD inception and extinction voltages are determined according to a specified Threshold value (pC).
TIME-Discharge Quantity Characteristic Test
In this mode, two levels of voltage “V1” and “V2” are applied continuously.
“V1” is held for “T1” seconds and “V2” is held for “T2” seconds.
PD inception and extinction voltages are determined according to a specified Threshold value (pC).
If no discharge exceeding the criterion value occurs during the last 5 seconds of the holding time “T2”, it is judged as “PASS”, and if it occurs, it is judged as “FAIL”.
Feature
● All-IN-ONE UNIT
The tester contains 3000V (or 5000V) testing power supply, coupling capacitor, detector and calibrator.
● EASY TO USE
No need cumbersome wiring.
● AUTO CALIBRATION
Calibration can be performed by simply pressing AUTO CAL key.
● AUTO ADJUSTMENT RANGE
The measurement range is automatically adjusted according to DUT.
● EASY-TO-UNDERSTAND DISPLAY OF MEASUREMENT STATUS
The measurement can be conducted while observing discharge waveform.
The applied voltage profile can be observed simultaneously.
● AUTO MEASUREMENT WITH SOFTWARE
RS232C interface is provided. Automatic measurement with the software is possible.