NOISEKEN Impulse Noise Simulator INS-S220 | PT. NIHON DENKEI INDONESIA Jakarta

Solve Market Noise Troubles -Beyond the Standards-

An ideal tester evaluates noise resistance of electronic devices due to discharge between contacts of switching devices, or arc discharge generated from electronic motors by generates simulated high-frequency noise with a rapid rise time.
With it’s high frequency component included in the testing pulse, and variable energy amount by changing the pulse width, it is capable of highly replicable noise testing against market’s noise troubles.

Impulse Noise Simulator

Model:

INS-S220

Maker:

NOISE LABORATORY CO.,LTD.

Features

Faster pulse repetition cycle testing is now possible
The high speed pulse-repetition-cycle improves malfunction occurrence, thus shortens testing time.
Simplifies pulse width setting
Only button operation enables pulse width setting in 50ns steps, reduces setup time and connection errors.
Simplifies pulse width setting
Only button operation enables pulse width setting in 50ns steps, reduces setup time and connection errors.
Improves test pulse waveform stabilities, enables highly replicable noise testing.
Saves cost by reduced number of consumable components.
Simplifies common/normal mode switch setting with short-plug design.
Enables easy wiring with built-in 50-ohm terminators.
Directly connects EUT AC plug with outlet panels. (Option)
Enables various testing with various probes and coupling adaptors. (Option)
Enables 3-phase 5 line testing with additional superimposing units. (Option)

Impulse Noise Simulator　INS-S220

Specification

Parameter	Specification
Pulse setting range①	Output voltage ： 0.50kV ～ 0.99kV ±10%　0.01kV step
	Pulse width ： 100ns ～ 1000ns ±10%　50ns step
	Variable ： 1ms ～ 999 ms ±10%　1ms step
Pulse setting range②	Output voltage ： 1.00kV ～ 2.00 kV ±10%　0.01kV step
	Pulse width ： 50ns ～ 1000 ns ±10%　50ns step
	Variable ： 10ms ～ 999 ms ±10%　1ms step
Output voltage	0.5～2.00kV±10％　（10V step）
Polarity	Positive ／ Negative
Rise time	3ns Max
Putput impedance	50Ω
Termination resistance	50Ω
Pulse repetition mode	LINE PHASE	50Hz/60Hz　injection phase angle ０～ 360°　±10°（1° step）　Synchronized with L-N of superimposed power supply
	VARIABLE	1ms ～ 999ms ±10%（Pulse setting range ①）
		10 ms ～ 999ms ±10%（Pulse setting range ②）
	EXT TRIG	Operation cycle：10ms Min. 　Pulse width：1ms Min. 　Input level：TTL/Open collector negative logic
		Select LINE PHASE mode, recognized as an external CDN zero-crossing sync signal when there is an input of 16 to 20 ms
	1 SHOT	Single output each time the 1 SHOT switch is pressed. Synchronized output at set phase angle in PHASE mode
Memory capacity	５ tests
Operating time	1s ～ 999s ±10%　1s step
Superposition phase switching	L(+), N(－), PE ／ PULSE OUT　※Manual switching by coaxial cables
Superposition mode	Common mode / Normal modeコ　※Manual switching by short plugs
EUT power capacity	Single phase AC240V ／ DC125V 16A 　(L(+), N(－), PE)
Power source／Power consumption	AC100 ～ 240V 50Hz/60Hz
Operating temperature／Humidity range	15 to 35℃／25～75％
Dimension／Mass	（W）430×（H）249×（D）540mm（Does not include protrusions）／Approx. 20kg
High voltage coaxial connector	NMHV　NoiseKen custom
Accessories	Coaxial cables 30cm（02-00013A）：２, SG setting short plugs（02-00106A）：1, SG cables（05-00103A）：1, Outlet Panels：１, AC cables：1, Instruction manuals：1, Accessories bags：1

Kirim Pertanyaan