CONTENTS CONTENTS

ITEMLIST

Products Infomation

KIKUSUI Insulation Resistance Tester TOS7300

It is suitable for research and development facilities, quality assurance testing and standard certification agency testing facilities, production lines, and more.

In the TOS7300 series, the output voltage can be freely set from 25 V to 1000 Vdc in 1 V steps (compliant with the output characteristics of JIS C 1302), making it an insulation resistance tester suitable for a wide range of applications—from electrical/electronic components to complete electrical and electronic equipment. Test settings, summaries, and diagrams are clearly visible on 4.3-inch color display. This series also comes standard with USB 2.0, USB compliant with USB-TMC, and RS232C.

Insulation Resistance Tester

Model:

TOS7300

Maker:

KIKUSUI

Download Materials

Easy operation for fast, safe, reliable testing!!

High-Speed Measurement Times

Boost productivity with speeds down to 10 ms!

Select a measurement time from 10 ms*/ 16.66 ms/ 20 ms/ 100 ms. Shorter measurement times help reduce takt time.
*TOS7301 and TOS7301 WITH LAN only

 

Safe and Reliable

Includes contact check and short-circuit detection!

Features a contact check function that detects poor connections to the EUT or broken test leads, plus a short-circuit detection function that identifies a shorted EUT before high voltage is applied to help prevent EUT damage.

 

Color LCD Screen for Improved Visibility!

Equipped with a 4.3-inch color display!

Color LCD Screen for Improved Visibility!

Test settings, overviews, and diagrams are clearly visible on the 4.3-inch display, making operation more intuitive.

 

Versatile Interfaces

Flexible automated testing made easy!

Versatile Interfaces

All models come standard with USB 2.0, USB-TMC compliant USB, and RS232C interfaces. In addition, WITH LAN models allow the use of a LAN interface.

Features

  • Output voltage range: 25 Vdc to 1000 Vdc
  • Resistance measurement range: 0.001 MΩ to 10.00 GΩ
  • Upper/lower limit judgement, short-circuit detection, and contact check function
  • RS-232C / USB interface standard
  • WITH LAN models come standard with a LAN interface
  • Equipped with a color LCD

Specification

Item Specifications
Environment Installation location Indoors, 2000 m or less. Pollution Degree 2 *1
Spec guaranteed range Temperature 18 °C to 28 °C (64.4 °F to 82.4 °F)
Humidity 20 %rh to 80 %rh (no condensation)
Operating range Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 20 %rh to 80 %rh (no condensation)
Storage range Temperature -25 °C to 70 °C (-13 °F to 158 °F)
Humidity 90 %rh or less (no condensation)
Power supply Nominal Voltage allowable voltage range 100 Vac to 240 V (90 Vac to 250 V)
Power consumption At no load (READY) 10 VA or less
Rated load 50 VA max.
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance (between AC LINE and chassis) 30 MΩ or more (500 Vdc)
Withstanding voltage Between AC LINE and chassis 1500 Vac, 1 minute, 10 mA or less
Between output terminal and chassis 800 Vac, 1 minute, 10 mA or less
Earth continuity 25 Aac, 0.1 Ω or less
Dimensions 214 (8.43) (MAX220 (8.66)) W × 80 (3.15) (MAX105 (4.13)) H × 260 (10.24) (MAX290 (11.42)) D mm (inches)
Weight Approx. 2.5 kg (5.5 lb.)
Accessories Power cord (1 pc., length: 2.5 m), High-voltage test lead: TL35-TOS (1 set), Getting Started Guide, Safety Information, China RoHS sheet
Electromagnetic compatibility (EMC)*2 *3 Complies with the requirements of the following directive and standards.
EMC Directive 2014/30/EU. EN 61326-1 (Class A *4), EN 61000-3-2, EN 61000-3-3, EN 55011 (Class A *4, Group 1 *5)
Applicable under the following conditions:
The maximum length of all cabling and wiring connected to the TOS73 series must be less than 2.5 m. Use the included high voltage test leads.
Electrical discharges are applied only to the EUT. Shielded cables are being used when using the SIGNAL I/O.
Safety *2 *3 Complies with the requirements of the following directive and standards.
Low Voltage Directive 2014/35/EU *3. EN 61010-1, EN 61010-2-034 (Class I *6, Pollution Degree 2 *1)

*1. Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional temporary conductivity caused by condensation.
*2. Does not apply to specially ordered or modified products.
*3. Only for models with CE mark/UKCA mark on their body.
*4. This product is a Class A instrument. This product is intended for use in an industrial environment. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
*5. This product is a Group 1 instrument. This product does not generate and/or use intentionally radio-frequency energy, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose.
*6. This is Class I equipment. Be sure to ground this product’s protective conductor terminal. The safety of this product is only guaranteed when the product is properly grounded.

 

Get Adobe' Reader'

To view the pdf files, the Adobe Reader from Adobe Systems is required.

Researched by Shared Research Inc.
about Nihon Denkei Co., Ltd.