HIOKI WIRELESS VOLTAGE/TEMP UNIT LR8510 | PT. NIHON DENKEI INDONESIA Jakarta

Logging Multi-point Data Has Never Been So Easy with a Wireless Data Logger

Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The Hioki LR8510 is a wireless, 15-channel voltage and temperature input module that utilizes Bluetooth® wireless technology to send measured data to the Hioki LR8410 Wireless Logging Station.

WIRELESS VOLTAGE/TEMP UNIT

Model:

LR8510

Maker:

HIOKI

Download Materials

Download Catalog PDF

Make measurements of interior conditions from the outside, with the door closed

● Have you dealt with problems like these?
We can’t close the windows or doors due to all the wires. As a result, there’s a gap in the gasket, and the vehicle cannot be sealed.

● Resolved with wireless data transmission
Wires do not protrude outside the vehicle, allowing the windows and doors to be closed so that the vehicle can be tested under airtight conditions.

Key Features

Capture logging data using Bluetooth® wireless technology. Install in hard-to-reach locations (*1)
Choose an input module based on the parameters you wish to measure (15-channel type)
Easily add up to 7 input modules wirelessly to keep your environment free of tangled wires (*2)
100 msec simultaneous sampling across all channels using rapid scanning method

Specification

Supported model	Model LR8410-20
Control and communications	Between instrument and unit: Bluetooth® 2.1 + EDR, Communications range: 30 m (98.43 ft), Security: SSP
Measurement parameters	[No. of channels] 15 analog channels; isolated scanning method input (2 terminals: M3 screw type) [Voltage] ±10 mV to ±100 V, 1-5 V f.s., max. 500 nV resolution [Temperature: Thermocouples] -200 ˚C to 2000 ˚C (depends on sensor), Thermocouples (K, J, T, or other), max. 0.01 ˚C resolution Not available for [Pt 100, JPt 100 sensor] [Resistance] [Humidity] [Max. rated voltage between isolated input channels] 300 V DC [Max. allowable input] ±100 V DC [Max. rated voltage from isolated terminals to ground] 300 V AC, DC
Operating temperature	-20 °C to +60 °C (-4 °F to 140 °F)
Power supply	[AC adapter] Using the AC adapter Z1008 (100 to 240 V AC, 50/60 Hz), 23 VA Max. (including AC adapter), 7 VA Max. (exclusive of AC adapter) [Internal battery] Using the Battery Pack Z1007 (optional accessory), 24 hours of continuous use (at 100 ms recording interval, 23 ˚C reference data), 120 hours of continuous use (at 1 minute recording interval, 23 ˚C reference data), 0.4 VA Max. [External power] 10 to 28 V DC, 7 VA Max.
Dimensions and mass	150 mm (5.91 in) W × 90 mm (3.54 in) H × 56 mm (2.20 in) D, 340 g (12.0 oz)
Included accessories	Instruction manual ×1, AC adapter Z1008 (with supplied power cord) ×1, Bracket ×1, M3×4 mm screw ×2

Countries and regions where wireless operation is currently supported (LR8510)

Countries and

regions where

wireless operation

is currently

supported

Australia, Austria, Bangladesh, Belgium, Bulgaria, Canada, Chile, Colombia, Croatia, Cyprus, Czech, Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Japan, Kenya, Latvia, Liechtenstein, Lithuania, Luxembourg, Macao, Malta, Myanmar, Netherlands, New Caledonia, New Zealand, Norway, Poland, Portugal, Romania, Saudi Arabia, Singapore, Slovakia, Slovenia, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, United Kingdom, United States, Viet Nam

Note

Use of devices that emit radio radiation requires approval in the country of use. Thus, use of the instrument in a country or region where they have not been approved may be subject to penalty as a violation of law.

Kirim Pertanyaan