HIOKI BATTERY IMPEDANCE METER BT4560 | PT. NIHON DENKEI INDONESIA Jakarta

Reliable for EIS measurement of high-capacity batteries for EVs & ESSs

The Battery Impedance Meter BT4560 can make EIS(*1) measurements quickly and easily in applications ranging from R&D to manufacturing. It delivers high-precision measurement capability for quality control of high-capacity batteries, and it can be expanded into an evaluation system for efficiently measuring multiple batteries. In addition, a new LAN interface simplifies the process of building a testing system, offering additional convenience.

BATTERY IMPEDANCE METER

Model:

BT4560

Maker:

HIOKI

Download Materials

Download Brochure PDF

A reliable EIS measuring instrument for applications ranging from R&D to manufacturing

Manage Charge Transfer Resistance (Rct), Electrolyte Resistance (Rel), and Diffusion Resistance to improve the quality of battery cell inspections

– Set your own measurement frequency between 0.01 Hz and 1.05 kHz
– Use low frequencies to measure charge transfer resistance and diffusion resistance
– Use high frequencies to measure electrolyte resistance and welding resistance
– Create Nyquist (Cole-Cole) plots with bundled application program
– Use equivalent circuit analytic software to analyze internal battery defects

Create Nyquist plots instantly

Nyquist plots (Cole-Cole) of Lithium-Ion batteries can provide invaluable insights into the battery chemistry and aid in research and development. This type of analysis has often been complicated, time-consuming, and expensive.
Using Hioki’s BT4560 Battery Impedance Analyzer connected to your PC, you can perform a frequency sweep quickly and easily, with the results plotted in real-time.

Measure very low impedances of 1mΩ or less

Some high-capacity Li-ion batteries have an internal impedance less than 1 mΩ.
The BT4560 is designed to measure very low impedances of 1mΩ or less with high stability and reproducibility.

Dedicated probes for four-terminal pair measurement reduce the magnetic flux generated

Probes with a four-terminal pair structure provide very stable measurement that is less affected by environmental noise or cabling.

Key Feature

EIS measurement frequency: 0.01 Hz to 1.05 kHz
Simultaneous measurement of impedance, voltage, & temperature
Convenient evaluation application software for R&D use
Data compatibility with third-party equivalent circuit analysis software
For production lines: LAN interface & advanced multi-channel solutions

Specifications

Allowable input voltage	Up to 5 V
Measured items	Impedance, voltage, temperature
Impedance measurement	Parameters: R (resistance), X (reactance), Z (impedance), θ (phase angle) Frequency: 0.01 Hz to 1050 Hz Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Measurement current: 3 mΩ range: 1.5 A rms, 10 mΩ range: 500 mA rms, 100 mΩ range: 50 mA rms
Voltage measurement	Measurement range: 5.00000 V (single range), measurement time: 0.1 s (FAST) to 1.0 s (SLOW)
Temperature measurement	Range: -10.0°C to 60.0°C, measurement time: 2.3 s
Basic accuracy	Z: ±0.4% rdg. θ: ±0.1°, V: ±0.0035% rdg. ±5 dgt., Temperature: ±0.5°C (at 10.0°C to 40.0°C)
Functions	Comparator, self-calibration, sample delay, average, voltage limit, potential gradient compensation for impedance measurement, charge/discharge prevention during AC signal application, key lock, system test, panel saving and loading (up to 126 condition sets)
Interfaces	LAN, RS-232C, USB, EXT. I/O (NPN/PNP can be switched)
Power supply	Rated supply voltage: 100 V to 240 V AC Rated supply frequency: 50 Hz/60 Hz Rated power 80 VA max
Dimensions and weight	Approx. 330W × 80H × 293D mm (12.99W × 3.15H × 11.54D in.), approx. 3.8 kg (134.0 oz.)
Included accessories	Power cord × 1, instruction manual × 1, zero-adjustment board × 1, USB cable (A-B type) × 1, CD-R (comes with communication instruction manual, PC application software, and USB driver) × 1

Kirim Pertanyaan