KIKUSUI Leakage Current Tester TOS3200 | PT. NIHON DENKEI INDONESIA Jakarta

Complying with various safety standards for general electrical equipment, this tester is used for touch current and protective conductor current tests

It enables you to conduct tests that conform to the requirements of the applicable IEC, UL, JIS, and other standards, as well as the Electrical Appliance and Material Safety Law. The memory in the main unit stores the 51 types of test conditions laid down in the IEC/JIS standards for information technology equipment, household electrical appliances, audio, video electronic apparatus, luminaires, motor-operated electric tools, and electrical equipment for measurement and control and in the Electrical Appliance and Material Safety Law, thereby enabling you to conduct standard tests with simple panel operation.

Leakage Current Tester

Model:

TOS3200

Maker:

KIKUSUI ELECTRONICS CORPORATION

Download Materials

Download Catalog

Fitur

Measures leakage current in 3 operation modes: Touch Current (TC), Protective Conductor Current (PCC), and METER mode
Eight types of measuring circuit networks are incorporated in the tester for measuring the touch current of general electrical apparatuses
Possible to measure DC/RMS/PEAK, realizing the “true root-mean-square value” with 30 mA as the maximum RMS
User-friendly operability
Possible to choose between Independent and Automatic Testing
51 types of preset safety standard tests
Function for controlling the calibration expiration limits
The utility software (Freeware) can be downloaded (more…). That enables you writing and reading TOS3200 test condition, reading test result, test control (execution and stop), reading measured leakage current value, and other functions.

Spesifikasi

Measurement terminal	Rated voltage/current	Terminals A to B: 250 V, terminal to chassis: 250 V, 100 mA
	Measurement category	CATⅡ
	Valid terminal display	Terminals effective to measurement are indicated with LED lamps.
Environment	Warranty range	Temperature: 5 ̊C to 35 ̊C, humidity: 20% rh to 80% rh (no condensation)
	Operating range	Temperature: 0 ̊C to 40 ̊C, humidity: 20% rh to 80% rh (no condensation)
	Storage range	Temperature: –20 ̊C to 70 ̊C, humidity: 90% rh or less (no condensation)
	Installation location	Indoors, altitude of 2000 m or less
AC line power requirements	Input power	Nominal input rating:100Vac to 240Vac, 50/60Hz, power consumption: 70 VA max.
	for EUT	Nominal input rating:100Vac to 240Vac, 50/60Hz
	for EUT	Rated output capacity: 1500 VA, maximum current: 15 A, rush current: 70 A peak max. (within 20 ms)
Insulation resistance		30 MΩ or greater (500 Vdc) (between AC line and chassis, between measurement terminal and chassis)
Withstanding voltage		1390 Vac, 2 seconds/20 mA or less (between AC line and chassis)
Earth continuity		25 Aac/0.1 Ω or less
Safety		Conforms to the requirements of the directive and standard below. Low Voltage Directive 2014/35/EU, EN61010-1 (Class I, Pollution degree 2)
Electromagnetic compatibility (EMC) 1, 2		Complies with the requirements of the following directive and standards. EMC Directive 2014/30/EU, EN 61326-1 (Class A), EN 55011 (Class A, Group 1), EN61000-3-2, EN61000-3-3 Applicable conditions: All cables and wires used to connect to this product must be shorter than 3 meters. Use the supplied test leads.
Outside dimensions, weight		320[12.60 inch] (345[13.58 inch]) W × 88[3.46 inch] (105[4.13 inch]) H × 270[10.63 inch] (335[13.19 inch]) D mm, approx. 5 kg(approx. 11.02 lbs)
Accessories		1 set of test leads (TL21-TOS: red and black, one each, with alligator clips) 1 flat probe (FP01-TOS), 1 spare fuse (15 A, for EUT power) 1 instruction manual, 1 circuit principle diagram sticker 2 power cords (for the tester and for the EUT AC line)

The warm-up time must be 30 minutes or longer.rdng denotes a reading, set denotes the set value, and EUT is the electrical equipment under test.

*1: May not apply to custom-made or modified products.
*2: Limited to products with CE marking on their panels.

Kirim Pertanyaan