HIOKI – BATTERY IMPEDANCE METER BT4560-60 [NEW] | PT. NIHON DENKEI INDONESIA Jakarta

Reliable EIS measurements of high-capacity battery cells for EVs and ESSs

The Battery Impedance Meter BT4560-60 can make EIS(*1) measurements quickly and easily in applications ranging from R&D to manufacturing. With its wide EIS measurement frequency range of 0.01 Hz to 10 kHz, the BT4560-60 is especially suited for battery cell design research and development.

BATTERY IMPEDANCE METER

Model:

BT4560-60

Maker:

HIOKI

Download Materials

Download Brochure

A reliable EIS measuring instrument for applications ranging from R&D to manufacturing

Manage Charge Transfer Resistance (Rct), Electrolyte Resistance (Rel), and Diffusion Resistance to improve the quality of battery cell inspections

Set your own measurement frequency between 0.01 Hz and 10 kHz
Use low frequencies to measure charge transfer resistance and diffusion resistance
Use high frequencies to measure electrolyte resistance and welding resistance
Create Nyquist (Cole-Cole) plots with bundled application program
Use equivalent circuit analytic software to analyze internal battery defects

Create Nyquist plots instantly

Nyquist plots (Cole-Cole) of Lithium-Ion batteries can provide invaluable insights into the battery chemistry and aid in research and development. This type of analysis has often been complicated, time-consuming, and expensive.
Using Hioki’s BT4560-60 Battery Impedance Analyzer connected to your PC, you can perform a frequency sweep quickly and easily, with the results plotted in real-time.

Measure very low impedances of 1mΩ or less

Some high-capacity Li-ion batteries have an internal impedance less than 1 mΩ.
The BT4560-60 is designed to measure very low impedances of 1 mΩ or less with high stability and reproducibility.

Dedicated probes for four-terminal pair measurement reduce the magnetic flux generated

Probes with a four-terminal pair structure provide very stable measurement that is less affected by environmental noise or cabling.

Feature Details

EIS measurement frequency: 0.01 Hz to 10 kHz
Simultaneous measurement of impedance, voltage, & temperature
Convenient evaluation application software for R&D use
Data compatibility with third-party equivalent circuit analysis software
For production lines
Scalability with the Switch Mainframe

Basic Specifications

Allowable input voltage	Up to 5 V
Measured items	Impedance, voltage, temperature
Impedance measurement	Parameters: R (resistance), X (reactance), Z (impedance), θ (phase angle) Frequency: 0.01 Hz to 10.00 kHz (For the 1.06 kHz to 10.00 kHz range, measurements below 1 mΩ in the 3 mΩ and 10 mΩ ranges, and below 10 mΩ in the 100 mΩ range, are not covered by the accuracy guarantee.) Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Measurement current: 3 mΩ range: 1.5 A rms, 10 mΩ range: 500 mA rms, 100 mΩ range: 50 mA rms
Voltage measurement	Measurement range: 5.00000 V (single range), measurement time: 0.1 s (FAST) to 1.0 s (SLOW)
Temperature measurement	Range: -10.0°C to 60.0°C, measurement time: 2.3 s
Basic accuracy	\|Z\| : ±0.4% rdg. θ: ±0.1°, V: ±0.0035% rdg. ±5 dgt., Temperature: ±0.5°C (at 10.0°C to 40.0°C)
Functions	Comparator, self-calibration, sample delay, average, voltage limit, potential gradient compensation for impedance measurement, charge/discharge prevention during AC signal application, key lock, system test, panel saving and loading (up to 126 condition sets)
Interfaces	LAN, RS-232C, USB, EXT. I/O (NPN/PNP can be switched)
Power supply	Rated supply voltage: 100 V to 240 V AC Rated supply frequency: 50 Hz/60 Hz Rated power 80 VA max
Dimensions and weight	Approx. 330W × 80H × 293D mm (12.99W × 3.15H × 11.54D in.), approx. 3.8 kg (134.0 oz.)
Included accessories	Power cord × 1, instruction manual × 1, zero-adjustment board × 1, USB cable (A-B type) × 1

Kirim Pertanyaan