ADCMT Solar Panel I-V Measurement System SS9600 | PT. NIHON DENKEI INDONESIA Jakarta

I-V measurement system for high-capacity solar panels up to 320 W

The SS9600 has six output ranges for solar panel evaluation: maximum 320 W (20 V/16 A, 40 V/8 A, 80 V/4 A) and maximum 280 W (7 V/40 A, 14 V/20 A, 28 V/10 A), that cover the I-V characteristics of most solar cells and panels.
By using DC voltage/current sources, not only I-V characteristic but also dark current characteristic evaluation in irradiation is available. The SS9600 can measure finely around Isc and Voc with the minimum step of 4ms by using the random sweep function in addition to the linear sweep function. That is, it can measure all types of solar cells including crystal, film and tandem solar cells.

Solar Panel I-V Measurement System

Model:

SS9600

Maker:

ADC CORPORATION

Features

Wide output ranges supporting large panels
280 W (7 V/40 A, 14 V/20 A, 2 8V/10 A)
320 W (20 V/16 A, 40 V/8 A, 80 V/4 A)
Automatic I-V characteristic evaluation of solar cells and panels
Not only I-V characteristic but also dark current characteristic evaluation in irradiation
Fine measurement around Isc and Voc by random sweep
Covering all types of solar cells including crystal, film and tandem solar cells
PASS/FAIL judgment value settings on all measurement parameters

Examples of use

Short-circuit current (Isc)/Short-circuit current density (Jsc)
Open-circuit voltage (Voc)
Maximum output (Pmax)/Maximum output density
Maximum output operating voltage (Vmax)
Maximum output operating current (Imax)/Current density
Fill factor (FF)
Series resistance (Rs)/Resistivity
Parallel resistance (Rsh)/Resistivity
Current of specified voltage (Iv)/Current density
Voltage of specified current (Vi)
Conversion efficiency (η)

Kirim Pertanyaan